408-4321 Datasheet, PDF (4/4 Pages) Tyco Electronics – Pneumatic CERTI-CRIMP Tool

Pneumatic CERTI- CRIMP Tool Holder 356304- 1
408- 4321
4. When the tool holder is not in use, store in a
clean, dry area.
6. REPLACEMENT AND REPAIR
Replacement parts and recommended spares are
listed in Figure 4. The recommended spares should
be stocked for immediate replacement. Order
replacement parts through your Tyco Electronics
Representative or call 1--800--526--5142, or send a
facsimile of your purchase order to 1--717--986--7605,
or write to:
CUSTOMER SERVICE (38--35)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
Tools may also be returned to Tyco Electronics for
evaluation and repair. For tool repair service, contact
a Tyco Electronics Representative at:
1--800--526--5136.
7. REVISION SUMMARY
The following changes were made since the previous
release of this sheet:
S Updated document to corporate requirements
S Added ORIGINAL INSTRUCTIONS
9
10
2
6
1
8
7
3
4
5
11
ITEM
1
2
3
4
5
6
7
8
9
10
11
4 of 4
REPLACEMENT PARTS AND RECOMMENDED SPARE PARTSG
PART NUMBER
DESCRIPTION
356623--1
356439--1
356624--1
356441--1
4--21028--9
354425--1G
356437--1
9--21000--0
21989--3
189765--1G
37887
CAM
ECCENTRIC
TOOL HOLDER BODY
PAWL, Ratchet
PIN, Slotted Spring, .125 x .375
PIN, Pivot
PLATE, Eccentric Adjustment
SCREW, Socket Head Cap, 4--40 x .31
SCREW, Socket Head Shoulder, .125 x .25
SETSCREW, Special
SPRING
Figure 4
Tyco Electronics Corporation
QTY PER
TOOL HOLDER
1
1
1
1
1
4
1
3
1
1
1
Rev C