58430-1 Datasheet, PDF (31/32 Pages) Tyco Electronics – AMPLIMITE .050 Series Cable Assemblies, Series III

Contact Arrangements
AMPLIMITE Subminiature D Connectors
Shielded AMPLIMITE .050 Series Contact Arrangements, Performance
Specifications, Technical Documents—Slimline Connectors
A
Position 1
C
B
Note: Mating face of receptacle is shown, plug is mirror image.
No. of
Pos.
26
Position No.
A
B
C
13
14 26
Performance Specifications
Technical Documents
Mating Cycles (Durability): 500 max.
Current Rating (30°C T-Rise): 1A max., 50% loading
Termination Resistance (Mated): 25 milliohms max.
Insulation Resistance: 1000 megohms min.
Dielectric Withstanding Voltage: 500 VAC
Header Processing Temperature: +220°C max. for 3 minutes
Temperature Range: –55°C to +105°C
Product Specifications describe technical performance
characteristics and verification tests. They are intended for
the Design, Component and Quality Engineer.
108-1366 Shielded AMPLIMITE .050 Series,
Slimline Connectors
Application Specifications describe requirements for using
the product in its intended application and/or termination infor-
mation. They are intended for the Packaging and
Design Engineer and the Setup person.
114-40036 Shielded AMPLIMITE .050 Series,
Slimline Connectors
Instruction Sheets provide instructions for assembling or
applying product. They are intended for Manufacturing
Assembler or Operator.
408-9663
408-6923
408-9701
408-7777
408-9746
408-9200
408-9721
408-9788
408-9898
Mass Insertion Tooling–Part No. 91291-I
AMP Manual Arbor Frame–Part No. 58024-1
Wire Termination Tooling Kit for CHAMPOMATOR 2.5
Machine–Part No. 1-762661-4
AMP Manual Arbor Frame w/Slide–Part No. 91085-2
Crimper Assembly–Part No. 856684-1
Single Wire Insertion Tool–Part No. 58430-1
Die Holder Assembly for Pneumatic Crimper–
Part No. 58449-I
Die Assembly–Part No. 90437-1
Backshell and Cover Tooling Assemblies–
Part No. 543521-1 and 543522-1
Customer Manuals provide information on TE termination
equipment. They are intended for Manufacturing Assemblers or
Operators.
409-5786
409-5791
409-5822
409-5843
CHAMPOMATOR 2.5 Machine
CHAMPOMATOR 2.5 Control Module–
Part No. 852423-I
Pneumatic Crimper–Part No. 312522-3
Pneumatic Power Unit
36
Catalog 82068
Revised 4-12
www.te.com
Note: All part numbers are RoHS compliant.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
Dimensions are in inches and
millimeters unless otherwise
specified.
USA: [phone]
Canada: [phone]
Mexico/C. Am.: [phone]
Latin/S. Am.: [phone]
Germany: [phone]
UK: [phone]
France: [phone]
Netherlands: [phone]
China: [phone]