V23138 Datasheet, PDF (3/5 Pages) Tyco Electronics – Single Nano Relay (THT – THR)

PCB Relays
Single Relays
Single Nano Relay (THT – THR)
Catalog 1308028-2
Revised 8-2009
Contact Data
Typical areas of application
Contact configuration
Circuit symbol
(see also Pin assignment)
Resistive/inductive load
1 Changeover contact /
1 Form C
35
Rated voltage
Rated current
Limiting continuous current
23°C
85°C
105°C
Contact material
Max. switching voltage/power
Max. switching current ¹⁾
On ²⁾
Off
Min. recommended load ³⁾
Voltage drop at 10 A (initial)
for NC/NO contacts
Mechanical endurance (without load)
Electrical endurance
at cyclic temperature –40/+23/+85°C
and 13.5 V
4
12 V
NC/NO
15 A/20 A
25 A /30A
15 A/20 A
10 A/12 A
Silver based
See load limit curve
NC/NO
30 A
30 A
1 A at 5 V
Typ. 30 mV, 300 mV max.
> 5 x 10⁶ operations
Motor reverse blocked:
> 10⁵ operations
at 25 A,
0.77 mH inductive load
1) _{The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5 V for 12 V load voltages.}
2) _{For a load current duration of maximum 3 s for a make/break ratio of 1:10.}
3) _{See chapter Diagnostics of Relays in our Application Notes page 31 or consult the internet at http://relays.tycoelectronics.com/appnotes/}
Load Limit Curve
100
138 S_LLC1
10
1
108
Load limit curve 2
Load limit curve 1
Load limit curve 1 ^{^}= arc extinguishes
during transit time
Load limit curve 2 ^{^}= safe shutdown,
no stationary arc
10
Switching current [A]
100
All specifications subject to change. Consult Tyco Electronics for latest specifications.