V23135 Datasheet, PDF (3/4 Pages) Tyco Electronics – Star Point Relay SPR High Current Devices High Current Solutions

High Current Solutions
High Current Devices
Star Point Relay SPR
Catalog 1308028-2
Revised 3-2008
Contact Data
Contact configuration
Circuit symbol
Triple make contact
Rated voltage
Rated current ¹⁾
Contact material
Limiting continuous current ¹⁾
23°C
85°C
125°C
Emergency switch off > 10 cycles without suppression device
Voltage drop at 90 A (initial) ³⁾ per load path
Mechanical endurance (without load)
Electrical endurance dry switching (I load only carried, not switched) ⁴⁾
12 V
200 A ²⁾
–
90 A
AgNi0.15
120 A
90 A
60 A
–
< 180 mV
> 10⁶ operations
> 2 x 10⁵ operations
I load = 120 A at 23°C
500 ms on/off
1) _{Max. terminal temperatures up to 180°C are allowed. Final temperatures depend on the leadframe layout.}
2) _{Parallel diode is not recommended in any case.}
3) _{After fritting with 90 A for 30 s.}
4) _Important.
Circuit Diagram
T0
1 Triple make contact/Form 3
36 V
60 A ²⁾
2
345
1
Coil Data
Available for nominal voltages
Nominal power consumption of the unsuppressed coil at nominal voltage
Test voltage winding/contact
Ambient temperature range
Operate time at nominal voltage
Release time at nominal voltage ¹⁾
1) _{For unsuppressed relay coil.}
Note:
A low resistive suppression device in parallel to the relay coil increases the release time and reduces
the lifetime caused by increased erosion and/or higher risk of contact tack welding.
12 V
1.5 W
500 VACrms
–40 to +125°C
< 20 ms
< 10 ms
188
All specifications subject to change. Consult Tyco Electronics for latest specifications.