V23130 Datasheet, PDF (3/4 Pages) Tyco Electronics – Battery Disconnect Switch BDS-A High Current Solutions

High Current Solutions
High Current Devices
Battery Disconnect Switch BDS-A
Contact Data for cable size ≥ 50 mm²
Contact configuration
Circuit symbol ^{1), 2)}
Catalog 1308028-2
Revised 3-2008
Form X
Rated voltage
12 V
Rated current
190 A
Limiting continuous current
23°C
260 A
85°C
190 A
125°C
88 A
Contact material
Silver based
Load current
From terminal B to A
Carrying capability: 1000 A 1 s on, 9 s off, 23°C, 50 mm²
50.000 operations ³⁾
Carry starter current: 1500 A-0.2 s/600 A-5 s on, 60 s off, 23°C, 50 mm²
50.000 operations ³⁾
Voltage drop at 100 A (initial, after 1 min)
< 40 mV
Electrical endurance: 180 A 0.1 mH 1.5 s on, 5 s off, (–40/25/120)°C/2 h each, 35 mm²
13.000 operations
Electrical endurance: 100 A 0.1 mH 1.5 s on, 5 s off, (–40/25/120)°C/2 h each, 35 mm²
50.000 operations
Electrical endurance: 150 A 0.1 mH 0.5 s on, 5 s off, (–40/25/120)°C/2 h each, 35 mm²
–
Electrical endurance: 100 A 0.1 mH 0.5 s on, 5 s off, (–40/25/120)°C/2 h each, 35 mm²
–
Switching capability: 1500 A 0.5 s on, 10 min off, 23°C, 50 mm² resistive load
5 operations ³⁾
Max. temperature at load terminals
140°C
Mechanical shock, half sine, 6 ms, 6 directions (OFF→ON)
40 g ³⁾
1) _{Delivery status “ex works”.}
2) _{Refer to Latching Relay in the “Glossary”.}
3) _{Values are influenced by system temperature and load current. For further details please consult our Technical Application Engineers.}
24 V
–
–
25.000 operations
70.000 operations
Circuit Diagram
X2C2D
1 Double make contact/1 Form X
with 2 Coils and 2 Diodes
130C_PA_3
Coil Data
Available for nominal voltages
Must operate voltage at 20°C (ON→OFF→ON) ¹⁾
Non operate voltage at 20°C ¹⁾
Test voltage winding/contact, contact-contact ¹⁾
Ambient temperature range
Coil excitation pulse length recommended/maximum
Switching time at 14 V
Noise level ²⁾
12 V
24 V
06 V
12 V
02 V
04 V
500 VACrms
–40 to +120°C
50 ms/100 ms
ON-OFF typ. 5 ms/OFF-ON typ. 5 ms
Typ. 86 dB (A)
1) _{Values are influenced by system temperature and load current. For further details please consult our Technical Application Engineers.}
2) _{Equivalent average sound pressure level leq, switch cycled with 1 Hz, microphone distance 10 cm, measuring time 15 s.}
All specifications subject to change. Consult Tyco Electronics for latest specifications.
201