408-10089 Datasheet, PDF (3/6 Pages) Tyco Electronics – These kits were designed for use with the AMPOMATOR System III Lead–Making Machine and the AMP–O–LECTRIC Servo Terminator III Machine.

Air Feed Kit 1752470-[ ] and Quick-Disconnect Kit 1752471-[ ]
4. OPERATION
4.1. Valve Port Identification
408-10089
5
1
4
3
2
PORT
NUMBER
1
2
3
4
5
T-Fitting
DESCRIPTION
Main Air Input
Normally Pressurized
Exhaust
Normally Un-pasteurized
Exhaust
Constant Air
SINGLE-ACTING, SPRING RETURN
DOUBLE ACTING APPLICATIONS
--
Feed Forward
--
Not Used
--
Special Applications
--
Feed Forward
--
Retract
--
Figure 6
4.2. Software
In order to use the air feed kit, the software required for it’s operation must first be installed on each terminator.
This is done by selecting the ST icon (see Figure 7) located on the main screen in TopWin.
Rev B
Figure 7
Tyco Electronics Corporation
3 of 6