2-1393240-9 Datasheet, PDF (3/3 Pages) Tyco Electronics – Power PCB Relay RT1 Inrush

General Purpose Relays
PCB Relays
Power PCB Relay RT1 Inrush (Continued)
PCB layout / terminal assignment
Bottom view on solder pins
16​A, 1 form C (CO) contact, pinning 5m​ m
monostable version
bistable version ^a)
SCHRACK
S0418-CM
16​A, 1 form A (NO) contact, pinning 5m​ m
monostable version
S0163-BE
S0163-BF
S0418-CV
12​A, 1 form C (CO) contact, pinning 5m​ m
monostable version, 1 form C (CO)
bistable version ^a)
S0163-DI
a) Indicated contact position
during or after coil
energization with reset
voltage.
b) for 2 coil version only
S0163DPS
monostable version, 1 form A (NO)
S0418-CN
S0163-BC
S0163-BD
*) With the recommended PCB hole sizes a grid
pattern from 2.5m​ m to 2.54m​ m can be used.
Product code structure
Typical product code RT
3
3
L 012
Type
RT Power PCB Relay RT1 Inrush
Version
3 16A, pinning 5mm, flux proof
2 12A, pinning 5mm, flux proof
Contact configuration
1 1 form C (CO) contact
3 1 form A (NO) contact
Contact material
K AgNi ​90/10
L AgSnO₂
Coil
Coil code: please refer to coil versions table
D 16A, pinning 5mm, sealed
Product code
Version
Contact material
Coil version
Coil
Part number
RT31L012
RT31L024
1 form C (CO)
AgSnO₂
Monostable
16A, pinning 5mm
12VDC
24VDC
7-1393239-3
7-1393239-5
RT31L048
flux proof
48VDC
7-1393239-6
RT33K012
1 form A (NO)
AgNi 90/10
12VDC
2-1393240-3
RT33K024
16A, pinning 5mm
24VDC
2-1393240-4
RT33KF12
flux proof
Bistable 2 coils
12VDC
1-1415540-1
RT33L012
AgSnO₂
Monostable 3-1393240-3
RT33L024
24VDC
3-1393240-5
RT33LA12
Bistable 1 coil
12VDC
2-1393240-7
RT33LA24

1 form C (CO)
24VDC
3-1415379-1
RTD1L012

16A, pinning 5mm
sealed
AgSnO2
Monostable
12VDC
5-1393238-6


03-2012, Rev. 0312
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
3
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions