1-1415898-6 Datasheet, PDF (3/4 Pages) Tyco Electronics – Power PCB Relay RT1 Inrush Power

Terminal assignment
Bottom view on solder pins
monostable version
General Purpose Relays
PCB Relays
Power PCB Relay RT1 Inrush Power (Continued)
SCHRACK
bistable version
S0163-BF
a)
S0163DPS
a) Indicated contact position during or after coil
energization with reset voltage.
b) for 2 coil version only
Dimensions / PCB layout
version without test tab
16​A, pinning 5m​ m
S0272-BW
version with test tab
S0272-BC
S0491-B
b) for 2 coil version only
s0418-CV
*) With the recommended PCB hole
sizes a grid pattern from 2.5m​ m to
2.54​mm can be used.
S0492-CU
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
3
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions