PSJ0XSS60 Datasheet, PDF (2/8 Pages) Tyco Electronics – The CHAMELEON Adaptable Module for General, High Performance or Medical Applications

CORCOM Product Guide
P Series
The CHAMELEON Adaptable Module for General, High Performance or
Medical Applications (Continued)
P Series Part Number Schematic
Part numbers are constructed by selecting the alphanumeric character which represents the desired feature.
Mounting Extender Switch Voltage Fuse
Style Options* Options ^‡ Select _** Options
Filter
Type
Filter Shield
Current Options*
PSJ ^{0 XSS60}
Mounting Style
E = Mounting ears
(Horizontal)
S = Snap-in
M = Mounting ears
(Vertical)
Switch Option
0 = Blank
S = Double pole
single throw
(DPST)
Fuse Options
D = Dual fuse
S = Single fuse
Filter Current
0 = No filter
3 = 3 amps
6 = 6 amps
X = 10 amps
Extender
Option
0 = None
C = FN260
J = J Series
L = L Series
Input Voltage Select
0 = Single voltage
S = Dual voltage _**
select (SMPS)
X = Dual voltage _**
select (series/parallel)
Filter Type
Shield Options
0 = No filter
0 = No shield
B = Interconnection
A = Filter shield
block ¦
B = Complete
H = Medical Filter
Shield
L = High Performance C = Complete can
Medical
(for L & Z models)
S = General purpose
Z = High Performance _***
Notes:
An additional extender which allows the P series to adapt to Corcom's L
series product cutout as well as the panel cutout of Schaffner and Delta
parts is also available.
• Extenders cannot be added to units with B shields
† When using the interconnection block, the last 3 digits of the part number
are BX (0, A, or B)
‡ For alternative switch orientation options, please contact technical sup
port or your Corcom sales representative
** Dual voltage options only available with filter types O, H or S
••• High performance versions are available with horizontal mounting ears
(PE style), no extenders, single voltage, complete can shield with options
for switch, fuses, filter type (L or Z) and 6 or 10 amp current ratings only.
Fuse holder
Optional switch
Extender for
J-Series or others
The part number PSJ0XSS60 would represent the equivalent of the Corcom
J Series 6J4:.
P Series (P)
with a snap-in mount (S)
with the J extender to fit the 6J4 cutout(J), and includes no switch (0)
dual voltage select (X)
single fusing (S),
general purpose filter (S)
for 6 amps (6)
with no shield (0).
Optional filter
Additional extender which allows the P series to adapt to CORCOM's L
series product cutout, as well as the panel cutout of Schaffner and Delta
parts is available.
* Extenders cannot be added to units with B shields.
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany:
49-89-6089-0
133
www.corcom.com
www.tycoelectronics.com