MAALSS0044 Datasheet, PDF (2/4 Pages) Tyco Electronics – Low Noise Amplifier 1.5 - 1.6 GHz

Low Noise Amplifier
1.5 - 1.6 GHz
RoHS
Compliant
MAALSS0044
V1
Electrical Specifications⁵: T_A = 25°C, V_DD = +5 V, Z₀ = 50 Ω
Parameter
Gain
Noise Figure
Input VSWR
Output VSWR
Output 1 dB Compression
Test Conditions
1.5 - 1.6 GHz, P_IN = -30 dBm
1.5 - 1.6 GHz
1.5 - 1.6 GHz, P_IN = -30 dBm
1.5 - 1.6 GHz, P_IN = -30 dBm
1.5 - 1.6 GHz
Input IP3
Reverse Isolation
Bias Current
1.5 - 1.6 GHz, P_IN = -30 dBm
1.5 - 1.6 GHz, P_IN = -30 dBm
—
Units
dB
dB
Ratio
Ratio
dBm
dBm
dB
mA
Min.
19
—
—
—
—
—
—
5
Typ.
21
1.55
1.5:1
1.5:1
6
-2
40
8
5. See plots for 3-volt performance.
Recommended PCB Configuration
Application Schematic ^6,7,8
VDD
Max.
23
1.9
—
—
—
—
—
11
L1
C1
Component List
Part
C1
L1
R1 (optional)
Value
500 pF
15 nH
35 to 40 Ω
Case Size
0603
0805
0603
Manufacturer
Murata
Coilcraft
Panasonic
RF IN
RF OUT
R1
(Optional)
See Note 8
6. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown.
7. Pin 3 is the RF input; pin 6 is the RF output. V_DD is
applied on pin 7. This pin must be bypassed with a 500 pF
surface mount MLC capacitor, mounted as close as
possible to pin 7, and RF decoupled with a chip inductor
having a minimum value of 15 nH (as shown in the
Recommended PCB Configuration).
8. Pin 2 allows use of an external resistor to ground for
optional, higher current bias. For nominal current
operation no resistor is used. For optional 20-mA current
operation, connect a 35- to 40-ohm chip resistor (as shown
in the Recommended PCB Configuration).
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.