MAALSS0027 Datasheet, PDF (2/6 Pages) Tyco Electronics – GPS Low Noise Amplifier 1.5 - 1.7 GHz

GPS Low Noise Amplifier
1.5 - 1.7 GHz
Electrical Specifications: T_A = 25°C, V_DD = 3 V, Z₀ = 50 Ω
Parameter
Gain
Noise Figure
Input Return Loss
Output Return Loss
Output 1 dB Compression
Output IP3
Reverse Isolation
Current
Test Conditions
1.575 GHz
1.575 GHz
1.575 GHz
1.575 GHz
1.575 GHz
-28 dBm Input Power, 1 MHz tone separation
1.575 GHz
1.575 GHz
—
Units
dB
dB
dB
dB
dBm
dBm
dB
mA
Min
17
—
—
—
—
12
—
—
MAALSS0027
V1
Typ
20
1.5
15
15
8.5
17
34
9.5
Max
22
1.9
—
—
—
—
—
16
SOT-26 Plastic Package
Operating the MAALSS0027
To operate the device, follow these steps:
1. Ramp V_DD to desired voltage, typically 3 to 5 V.
2. Set RF input.
3. Power down in reverse sequence.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.