MAALSS0013 Datasheet, PDF (2/7 Pages) Tyco Electronics – Satellite Radio Low Noise Amplifier 2.2 - 2.4 GHz

Satellite Radio Low Noise Amplifier
2.2 - 2.4 GHz
MAALSS0013
V6
Electrical Specifications: T_A = 25°C, V_DD = 5 V, Z₀ = 50Ω
Parameter
Gain
Noise Figure
Input Return Loss
Output Return Loss
1 dB Compression
Output IP3
Current
Frequency
2.3 GHz
2.3 GHz
2.3 GHz
2.3 GHz
2.3 GHz
2.3 GHz
—
Units
dB
dB
dB
dB
dBm
dBm
mA
Min.
15
—
—
—
—
20
—
Typ.
17
0.9
12
13
10
26
26
Max.
19
1.5
—
—
—
—
30
SOT-26 Plastic Package
Operating the MAALSS0013
To operate the device, follow these steps:
1. Ramp V_DD to desired voltage, typically 3 to 5 V.
2. Set RF input.
3. Power down in reverse sequence.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.