MA02203AD Datasheet, PDF (2/5 Pages) Tyco Electronics – 3.6 V, 450 mW DECT RF Power Amplifier IC

Pa3r.6t DVe, s4c5r0ipmtioWn _{DECT RF Power Amplifier IC}
MA02203AD
V 1.0
Electrical Specifications: T_S = 40 °C¹, Z₀ = 50 Ω ^2,3
Parameter
Test Conditions
Units Min
Typ
Max
Frequency
Output Power
Pout Frequency Dependency
Power Gain
Current Consumption
Input VSWR, PA On
Input VSWR, PA Off
Isolation, PA Off
2^nd Harmonics
3^rd Harmonics
Thermal Resistance
V_DD1, V_DD2 = 0 V
V_DD1, V_DD2 = 0 V
Junction of 2nd stage FET to pin 11, Duty
Cycle=50%
MHz
dBm
dB
dB
mA
-
-
dB
dBc
dBc
o_C/W
1880
25.5
40
26.5
0.2
24.5
350
1.6:1
1.4:1
31
55
1900
27.5
0.5
420
2.0:1
2.0:1
63
Load Mismatch
Stability
V_DD = 4.6 V, VSWR = 10:1, P_IN = 7 dBm
-
P_IN = -3 to +7 dBm, V_DD = 0 - 4.6 V, 0 mW
< P_OUT < 450 mW, T_S = -40 to +75 °C, Load -
VSWR = 10:1
No degradation
All spurs < -60 dBc
1. Ts is the temperature measured at the soldering point of pin 11.
2. Unless otherwise specified, input power is +2 dBm, V_DD is +3.6 V, and test frequency is 1890 MHz.
Absolute Maximum Ratings¹
Parameter
Absolute Maximum
Max Input Power
Operating Voltages
Operating Temperature, Ts
Channel Temperature
Storage Temperature
+6 dBm
+5.5 volts
-40 °C to +75 °C
+150 °C
-40 °C to +150 °C
1. Exceeding any one or combination of these limits may cause permanent damage.
Specifications subject to change without notice.
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]
2
Visit www.macom.com for additional data sheets and product information.