EFM-2100 Datasheet, PDF (2/4 Pages) Tyco Electronics – E-Series Surface Mount Mixer 2110-2170MHz

E-Series Surface Mount Mixer
2110 – 2170 MHz
Electrical Specifications: T_A = 25°C, Z₀ = 50Ω ¹
Parameter
IF VSWR
Input IP3
Input IP3
Input 1dB Compression
Test Conditions
—
Up Converting
Down Converting
—
Frequency
100 - 500
—
—
1850 - 1980
Units
Min
—
—
dBm
30.0
dBm
30.0
dBm
—
Pin Configuration
Schematic
Pin No. Function
1
Ground
8
2
RF
9
3
Ground
10
4
Ground
11
5
Ground
12
6
Ground
13
7
Ground
14
Ground
LO
Ground
Ground
Ground
Bias
IF
EFM-2100
V2
Typ
Max
1.8
—
34.0
—
34.0
—
22.0
—
Absolute Maximum Ratings ¹
Parameter
Max RF Power
Peak IF Current
Operating Temperature
Storage Temperature
ESD Rating
Absolute Maximum
200 mW
40 mA
-40°C to +85°C
-55°C to +125°C
Zero
1. Operation of this device above any one of these parameters
may cause permanent damage.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: [phone] / Fax: [phone]
• Europe Tel: [phone] / Fax: [phone]
• Asia/Pacific Tel: [phone] / Fax: [phone]
Visit www.macom.com for additional data sheets and product information.