DS9-1W Datasheet, PDF (2/2 Pages) Tyco Electronics – AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink)

DS9 Series High Performance Solid State Relays
AC solid state relay for loads up to 1A @ 250Vrms (2A with heatsink) (Continued)
Environmental Characteristics
Ambient Temperature Range:
Operating: -55°C to +110°C.
Storage: -55°C to +125°C.
Vibration Resistance:
20 G’s, 10-2,000 Hz.
Shock Resistance:
1,500 G’s, 0.5 ms pulse.
Acceleration Resistance (Y axis):
5,000 G’s.
Mechanical Characteristics
Weight (typical):
.176 oz. (5 grams)
Materials:
Header: Kovar
Pins: Kovar, gold plated
Cover: Nickel.
Electrical Specifications (-55°C to +105°C unless otherwise specified)
Input
Input supply voltage range (Vcc)
3.8 - 32 Vdc
Input current (max.) @ 5Vdc
15mAdc
Must turn-on voltage
3.8Vdc
Must turn-off voltage
1.5Vdc
Reverse voltage protection
-32Vdc
I/O
Dielectric strength (min.)
Insulation resistance (min.) @ 500VDC
1,500V rms/60 Hz.
109 ohms
Capacitance (max.)
10pF
Output
Output current rating (max.)
2A rms (Fig. 2, Note 1)
Surge current, 16ms @ 25°C (max.)
8A pk (Fig. 1, Note 3)
Continuous load voltage (max.)
250V rms
Transient blocking voltage (max.)
500V pk
Frequency range
40 - 440 Hz.
Output voltage drop (max.) @ 1A load current
1.5V rms
Off-state leakage current (max.) @ 250V rms/400 Hz.
1mA rms
Turn-on time (max.)
1/2 cycle
Turn-off time (max.)
1 cycle
Off-state dv/dt (min.), with snubber
200V /µs (Note 2)
Zero voltage turn-on window, initial (max.)
10V
Waveform distortion (max.)
4V rms
Output chip junction temperature (max.)
130°C
Thermal resistance (max.), junction to ambient
65°C/W
Thermal resistance (max.), junction to case
15°C/W
Notes
1. Operation at elevated load currents up to 2 amps is dependent on use of suitable heatsink to maintain case temperature per Fig. 2.
2. Recommended output snubber: R = 100 ohms (1/2 W), C = .01µF (600V).
3. Heating of output chip during and after a surge may cause loss of output blocking capability until junction temperature falls below maximum rating.
Figure 1 - Peak Surge Current vs. Surge Current Duration
Figure 2 - Load Current vs. Temperature
10
8
6
4
2
010
W/ Heat Sink
W/O Heat Sink
100
1000
10,000
Surge Current Duration (mSec)
Case Temperature
2
@ 5 Vdc Input
@ 32 Vdc Input
Ambient Temperature
1
(W/O _{Heat Sink)}
@ 5 Vdc Input
@ 32 Vdc Input
0
-55 0 10 30 50 70 90
Temperature (°C)
110 130
DS9-TBD–PDF–KRG–1-04
2
www.tycoelectronics.com
Dimensions are in inches and
millimeters unless otherwise
specified. Values in brackets
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA: 1-800-522-6752
Canada: 1-905-470-4425
Mexico: 01-800-733-8926
C. America: 52-55-5-729-0425
South America: 55-11-3611-1514
Hong Kong: 852-2735-1628
Japan: 81-44-844-8013
UK: 44-141-810-8967