AM-AMC-182 Datasheet, PDF (2/3 Pages) Tyco Electronics – Cascadable Thin Film Amplifier, 28 dB Gain, 5 - 1000 MHz

Cascadable Thin Film Amplifier, 28 dB Gain, 5 - 1000 MHz
AM-/AMC-182
Electrical Specifications ^2,3 T_A = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency
Units
Min.
Typ.
V 3.00
Max.
Gain
@ +25°C
300 MHz
dB
27.2
28.2
29.2
Frequency Response
—
5 - 1000 MHz
dB
—
—
±1.2
Gain Variation with
Temperature
1 dB Compression
—
Output Power
5 - 1000 MHz
dB
—
5 - 1000 MHz
dBm
+9
—
±1.2
—
—
Noise Figure
—
5 - 1000 MHz
dB
—
—
4.5
Reverse Transmission
—
5 - 1000 MHz
dB
—
-36
-32
VSWR
—
5 - 1000 MHz
Ratio
—
—
2.0:1
Output IP₂
Two-tone inputs up to 0 dBm 5 - 1000 MHz
dBm
+28
—
—
Output IP₃
Two-tone inputs up to 0 dBm 5 - 1000 MHz
dBm
+18
—
—
Vbias
—
—
V
+14.5
+15.0
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
44
50
Power Dissipation
@ +15V Bias
—
mW
—
660
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 800 mW
must be provided in use.
Specifications subject to change without notice.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.