AM-AMC-151 Datasheet, PDF (2/3 Pages) Tyco Electronics – Cascadable Thin Film Amplifier, 12 dB Gain, 5 - 500 MHz

Cascadable Thin Film Amplifier, 12 dB Gain, 5 - 500 MHz
AM-/AMC-151
Electrical Specifications ^2,3 T_A = -55°C to +85°C Case Temperature
Parameter
Test Conditions
Frequency
Units
Min.
Typ.
V 3.00
Max.
Gain
@ +25°C
50 MHz
dB
11.5
12.0
12.5
Frequency Response
—
5 - 500 MHz
dB
—
—
±1.0
Gain Variation with
Temperature
1 dB Compression
Noise Figure
—
Output Power
—
5 - 500 MHz
dB
—
—
±0.8
5 - 500 MHz
dBm
+19
—
—
10 - 500 MHz
dBm
+20
—
—
5 - 500 MHz
dB
—
—
7.0
Reverse Transmission
—
5 - 500 MHz
dB
—
-16
-13
VSWR
—
5 - 500 MHz
Ratio
—
—
2:1
Output IP₂
Two-tone inputs up to +10 dBm 5 - 500 MHz
dBm
+48
—
—
Output IP₃
Two-tone inputs up to +10 dBm 5 - 500 MHz
dBm
+34
—
—
Vbias
—
—
V
+14.5
+15.0
+15.5
Ibias
Vbias = +15.0 VDC
—
mA
—
85
100
Power Dissipation
@ +15V Bias
—
mW
—
1275
—
2. All specifications apply when operated at +15 VDC, with 50 ohms source and load impedance.
3. Heat Sinking: Operation at case temperature above 95°C is not recommended. Heat sinking adequate to dissipate 1.3W must
be provided in use.
Specifications subject to change without notice.
2
n North America: Tel. [phone]
n Asia/Pacific: Tel.[phone], Fax [phone]
n Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.