82A0112 Datasheet, PDF (2/2 Pages) Tyco Electronics – This specification sheet forms a part of the latest issue of Raychem Specification 80.

SCD Number
SPECIFICATION CONTROL DRAWING Page 2 of 2
82A0112
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CONCENTRICITY: 70% (minimum)
CROSSLINKING PROOF TEST: 300 ± 3°C,
30 minutes for AWG 28 - 14, 1 hour for AWG 12 - 0
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION AND TENSILE STRENGTH:
AWG 28-26, Elongation, 75% (minimum)
Tensile Strength, 3000 lbf/in² (minimum)
AWG 24 - 10, Elongation, 75% (minimum)
Tensile Strength, 3500 lbf/in² (minimum)
AWG 8 - 0 Elongation 125% (minimum )
Tensile Strength, 3000 lbf/in² (minimum)
INSULATION FLAWS:
Spark Test: 4.2 kV (rms) at 3 kHz
Impulse Dielectric Test, 6.0 kV (peak)
INSULATION THICKNESS:
AWG 28-16, .004 in. (minimum)
AWG 14-10 .006 in. (minimum)
AWG 8-0 .012 in. (minimum)
PRODUCT IDENTIFICATION: Black ink only for AWG 28 - 10,
Black ink preferred for AWG 8 & larger
SECANT MODULUS:
AWG 28-10, 5.0 x 10⁴ lbf/in² (maximum),
AWG 8-0, 4.0 x 10⁴ lbf/in² (maximum),
2% strain, 2 inch jaw separation, 0.2 inch/minute, procedural reference ASTM D 882
SHRINKAGE: 150 ± 3°C for 6 hours,
AWG 28 - 10, 0.13 inch (maximum) in 12 inches
AWG 8- 0, 0.25 inch (maximum) in 12 inches
VOLTAGE WITHSTAND TEST (POST ENVIRONMENTAL):
2500 volts (rms), 60 Hz
1/ PART NUMBER:
The "*" in the part numbers on page 1 shall be replaced by
color code designators.
Example:
AWG 22, white: 82A0112-22-9
AWG 22, white with black stripe: 82A0112-22-90
1/ See footer section on page 1