3-1393239-6 Datasheet, PDF (2/2 Pages) Tyco Electronics – Power PCB Relay RT1 sensitive

General Purpose Relays
PCB Relays
Power PCB Relay RT1 sensitive (Continued)
SCHRACK
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter
Ambient temperature
-40 to 85°C
Category of environmental protection
IEC 61810
RTII - flux proof, RTIII - wash tight
Vibration resistance (functional),
form A/form B contact, 30 to 500Hz
20g/5g
Shock resistance (destructive)
100g
Terminal type
PCB-THT, plug-in
Weight
14g
Resistance to soldering heat THT, IEC 60068-2-20
RTII
270°C/10s
RTIII
260°C/5s
Packaging/unit tube/20 pcs., box/500 pcs.
Accessories
For details see datasheet
Accessories Industrial Power Relay RT
NOTE: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
PCB layout / terminal assignment
Bottom view on solder pins
10​A, pinning 3.5m​ m
S0418-CB
*) With the recommended PCB hole sizes a grid
pattern from 2.5m​ m to 2.54m​ m can be used.
1 form C (CO) contact
Dimensions
1 form A (NO) contact
S0163-BG
S0272-BB
S0163-BH
Product code structure
Typical product code RT
1
7
4 012
Type
RT Power PCB Relay RT1 sensitive
Version
1 10A, pinning 3.5mm, flux proof
Contact configuration
7 1 form C (CO) contact
Contact material
4 AgNi 9​ 0/10
Coil
Coil code: please refer to coil versions table
B 10A, pinning 3.5mm, wash tight
8 1 form A (NO) contact
Product code
Version
Contacts
Contact material
RT174005
Flux proof
1 form C (CO)
AgNi 90/10
RT174009
contact
RT174012
RT174024
RT184005
1 form A (NO)
RTB84009
Wash tight
contact
This list represents the most common types and does not show all variants covered by this datasheet.
Other types on request
Coil
5VDC
9VDC
12VDC
24VDC
5VDC
9VDC
Part number
3-1393239-6
9-1419143-5
3-1393239-8
3-1393239-9
4-1393239-5
4-1393238-7
2
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.