2058729-1 Datasheet, PDF (2/2 Pages) Tyco Electronics – Solid Wire Grounding Assembly

Solid Wire Grounding Assembly 2058729-1
408-10262
2. Remove the wire from the wire slot.
3. Continue holding the hex body, and using an
11_{/32–in. socket wrench, loosen the hex washer}
nut. Remove the wire bolt from the frame.
5. REPLACEMENT AND REPAIR
The grounding assembly can be re–used up to 5
times after proper removals. The grounding assembly
can not be repaired. DO NOT use defective or
damaged product.
Order replacement grounding assemblies through
your representative, or call 1–800–526–5142, or send
a facsimile of your purchase order to 717–986–7605,
or write to:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
6. REVISION SUMMARY
S Initial release of instruction sheet
2 of 2
Tyco Electronics Corporation
Rev A