2-1393844-0 Datasheet, PDF (2/4 Pages) Tyco Electronics – Power Relay RM 2/3/7

General Purpose Relays
Industrial Relays
Power Relay RM 2/3/7 (Continued)
SCHRACK
Coil Data (continued)
Coil versions, AC coil
Coil code
Rated Operate Release
Coil Rated coil
STD LED voltage voltage voltage resistance power
50/60Hz 50/60Hz 50/60Hz

VAC
VAC
VAC Ω±10%¹⁾²⁾
VA
Coil versions, AC-coil, RM2, RM3
506 R06
6
4.8/5.1
1.8
5.3
2.29/1.98
512 R12
12
9.6/10.2 3.6
24
2.19/1.86
524 R24
24
19.2/20.4 7.2
86
2.26/ 1.95
548 R48
48
38.4/40.8 14.4
345 2.28/1.97
560 R60
60
48.0/51.0 18.0
544 2.27/1.96
615 S15
115
92.0/97.8 34.5
2000 2.37/2.00
730 T30
230 184.0/195.5 69.0
8300¹⁾ 2.32/ 1.96
900 V00
400 320.0/340.0 120.0 27500²⁾ 2.31/1.96
Coil versions, AC-coil, RM7
506 R06
6
4.8/5.1
1.8
4.7
2.86/2.36
512 R12
12
9.6/10.2 3.6
19.5 2.71/2.27
524 R24
24
19.2/20.4 7.2
80
2.62/2.00
548 R48
48
38.4/40.8 14.4
320 2.60/2.17
560 R60
60
48.0/51.0 18.0
500 2.62/2.20
615 S15
115
92.0/97.8 34.5
1850 2.65/2.22
730 T30
230 184.0/195.5 69.0
7500 2.69/ 2.26
900 V00
400 320.0/340.0 120.0 23500²⁾ 2.61/2.20
1) _{Coil resistance ±12%,} 2) _{Coil resistance ±15%}
All figures are given for coil without pre-energization, at ambient temperature +23°C
Other Data
RM2
RM3
RM7
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
-45 to 70°C -45 to 60°C -45 to 60°C
AC coil
-45 to 60°C -45 to 55°C -45 to 50°C
Cold storage, IEC 60068-2-1
16h/-40°C
Dry heat, IEC 60068-2-2
16h/+85°C
Damp heat cyclic , IEC 60068-2-30, Db, Variant 112/12h +25/+55°C
Category of environmental protection
IEC 61810 RTI - dust protected
Vibration resistance (functional)
form A (NO)/form B (NC)
5/2g
5/2g
12/4g
Terminal type
PCB-THT, plug-in,

quick-connect
Cover retention, pull/push force
100/100N
Weight
81g
Resistance to soldering heat THT
IEC 60068-2-20
270°C/10s
Packaging unit
10/25 pcs.
Accessories
For details see datasheet
Accessories Power Relay RM
Note: indicated contact ratings and electrical endurance data for direct
wiring of relays (according IEC 61810-1); for relays mounted on sockets
deratings may apply.
PCB layout / terminal assignment
Bottom view on pins
Insulation Data
RM2
RM3
RM7
Initial dielectric strength
between open contacts
1500Vrms 1500Vrms 1500Vrms
between contact and coil
2500Vrms 2500Vrms 2500Vrms
between adjacent contacts 2500Vrms 2500Vrms 2500Vrms
Initial surge withstand voltage
between contact and coil
5000V
4000V
4000V
Clearance/creepage
between contact and coil
≥4.0/14.9mm
between adjacent contacts
≥6.1/7.3mm
Material group of insulation parts
IIIa
3 form C (CO) contacts
2 form C (CO) contacts
S0269-AA
S0269-AB
2
10-2012, Rev. 1012
www.te.com
© 2012 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
S0269-AD
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.