2-1393774-0 Datasheet, PDF (2/5 Pages) Tyco Electronics – P1 Relay V23026

Signal Relays
P1 Relay V23026 (Continued)
AXICOM
Coil data (continued)
Insulation Data
Initial dielectric strength
Coil versions, THT and SMT, bistable 2 coils
Coil
Rated
Set
Reset
Coil
Rated coil
code
voltage
voltage
voltage resistance power
between open contacts
between contact and coil
Initial surge withstand voltage
500V_rms
1500V_rms
VDC
VDC
VDC
Ω ±10%
mW
between contact and coil
2500V
106
3
2.25
2.25
130
69
Capacitance
101
5
3.75
3.75
390
64
between open contacts
max. 5pF
105
9
6.75
6.75
1200
68
between contact and coil
max. 6pF
102

12
9.00
9.00
1500
96
24¹⁾
Clearance/creepage
between contact and coil
0.75mm
All figures are given for coil without pre-energization, at ambient temperature +23°C.
between adjacent contacts
0.75mm
Coils I and II are identical.
1) _{A nominal voltage of 24VDC is feasible with a 12VDC coil with a series resistor (1500Ω)}
RF Data
Coil data (continued)
Isolation at 100MHz/900MHz
Insertion loss at 100MHz/900MHz
-30.0dB/-18.0dB
-0.12dB/-1.9dB
AXICOM _Coil
Coil
versions, THT,
Rated
bistable 1
Set
co_Til_{e lecomR-e, Ssiegtnal a nd RF RCeloayils}
Rated coil
Voltage standing wave ratio (VSWR)
at 100MHz/900MHz _{108-98009 Rev. E}1.06/1.75
code
voltage
VDC
voltage
VDC
P1 ^vV^oVlDt2^aCg3^e026^reΩsR^i±st1e^a0n%l^ca^ey
power
mW
Other Data
056
3
2.25
-2.25
300
30
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
051
5
3.75
-3.75
740
34

refer to the Product Compliance Support Center at
0_C57_{oil Opera}9_{ting Rang}6._e75
-6.75
2160
38

www.te.com/customersupport/rohssupportcenter
052
12
9.00
-9.00
4500
32
Ambient temperature
-40 to +85°C
054
24
18.00
-18.00
4500
128 _UnomCaItEeCgo6₌ry18o_{N1f 0eo}n_mv_ii_nro_an_lm_coen_ilt_va_ol p_ltaro_gt_eection,RT _{III - immersion cleanable}
65 mW
130 mW
Coil data (continued)
Umax. at 0 A
Coil versions,USmMaxT. a, tb0istAable 1 coil Um ax. at - 1 A
Coil
Rated
Set
Reset
Coil
code
voltage
voltage
voltage resistance
U_maxV_. ibratio=n reUspisptaenrcleim(fiut nocfttiohneaol)p era tive rang2e0go,f 200 to 2000Hz
the coil voltage (limiting voltage) 40g, 10 to 200Hz
Shock resis_wta_hn_ec_ne_c(_ofu_iln_sc_atio_rena_cl_o) _{ntino usly energized}
IEC 60068-2-27 (half sine)
50 g
U_{op. mTeinr.mina}=_{l ty}L_po_e wer limit of t he operativ_Pe_Cr_Ban_tg_ere_mo_inf _{als and SMT terminals}
Rated coil Weight ^{the coil volt age (reliable operate} max. 2g
power
Resistancevtooltsaogled)ering heat THT
VDC
VDC
VDC
Ω ±10%
mW
051
5
3.75
-3.75
740
34
052
12
9.00
-9.00
4500
32
A nominal voltage of 24V is feasible with a 12V coil with a series resitor (4500Ω)
Other coil voltages^Uoⁿn^omre^.qⁿu^oes^mt ^{inal coil voltage}
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Coils I and II are identical.
Uop. min.
Urel. min.
IEC 60068-2-20
265 °C/10s
U_{rel. mRien.sista}=_nceL_to_ow_se_or_ldli_em_rinit_go_hf _eth_ae_{t S}o_Mpe_Trative range of
IEC 600^t6^h8^e-2^c-^o5ⁱ8^{l v oltage (r eliable release} see reflow profile
Moisture se^vn^os^lti^ativ^ge^e)level, JEDEC J-Std-020D
MSL3
Washing
not recommended
Ultrasonic cleaning
possible
Packaging unit
THT
2000 pcs.
SMT
2400 pcs.
Coil operative range, ^Ab^mist^baⁱb^enle^{t Temperature [°C]}
Umax upper limit of the operative range of the coil voltage (limiting voltage) when coils are
Umax. - 5 % coil duty at 1 A
65 mW Latching
32 mW Latching
Umax. - 100 % coil duty at 0 A
Umax. - 5 % coil duty at 0 A
Unom. nominal coil voltage
Uset min.
Ambient Temperature [°C]
continuously energized.
Uop min lower limit of the operative range of the coil voltage (reliable operate voltage).
Urel min lower limit of the operative range of the coil voltage (reliable release voltage).
2
02-2012, Rev. 0212
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.