2-1393030-9 Datasheet, PDF (2/2 Pages) Tyco Electronics – “Hockey Puck” Solid State Relay With Paired SCR Output

Catalog 1308242
Issued 3-03 (PDF Rev. 11-05)
Output Specifications (@ 25° C, unless otherwise specified)
Parameter
Load Voltage Range V_L
Repetitive Blocking Voltage (Min.)
Load Current Range I _L*
Single Cycle Surge Current (Min.)
Leakage Current (Off-State) (Max.)
On-State Voltage Drop (Max.)
Static dv/dt (Off-State) (Min.)
Thermal Resistance, Junction to Case
(R _{θ J-C}) (Max.)
Nom. Line Voltage
120/240V Model
480V Model
120/240 Model
480V Model
120/240 & 480V Models
120/240 & 480V Models
120/240V Model
480V Model
120/240 & 480V Models
120/240 & 480V Models
Conditions
Resistive
f = 60 Hz. V_L = 240V rms
f = 60 Hz. V_L = 480V rms
I _L= Max.
120/240 & 480V Models
Units
V rms
V rms
V peak
V peak
A rms
A peak
mA rms
V/μs
°C/W
Turn-On Time (Max.)
120/240 & 480V Models
f = 60 Hz.
ms
Turn-Off Time (Max.)
I ²T Rating
Load Power Factor Rating
*See Derating Curves
120/240 & 480V Models
120/240 & 480V Models
120/240 & 480V Models
f = 60 Hz.
t = 8.3 ms
I _L= Max.
ms
A² Sec.
Electrical Characteristics (Thermal Derating Curves)
25A Units
50A Units
P&B
25A Models
.05 - 25
250
50A Models
24 - 280
48 - 660
±600
±1200
.1 - 50
750
.1
.25
1.35
500
125A Models
.1 - 125
1,700
0.4
0.25
.15
8.3 for Zero Voltage Turn-On DC input types,
20 for Zero Voltage Turn-On AC input types,
0.02 for Random Voltage Turn-On Models
8.3 for DC input types, 30 for AC input types
937
2,458
12,000
0.5 - 1.0
125A Units
Operating Diagrams
-4
CONSTANT
CURRENT
DC INPUT
+3
EQUIVALENT CIRCUIT ONLY
ZERO
VOLTAGE
CIRCUIT†
1
OUTPUT
2
4
AC INPUT
3
EQUIVALENT CIRCUIT ONLY
ZERO
VOLTAGE
CIRCUIT†
† Random Turn-on Units have a Random Turn-on circuit
instead of Zero Voltage Circuit
1
OUTPUT
2
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Heatsink Recommendations
• We recommend that solid state relay modules be mounted to a
heatsink sufficient to maintain the module’s base temperature at less
than 85°C under worst case ambient temperature and load conditions.
• The heatsink mounting surface should be a smooth (30-40 micro-inch
finish), flat (30-40 micro-inch flatness across mating area), un-painted
surface which is clean and free of oxidation.
• An even coating of thermal compound (Dow Corning DC340 or
equivalent) should be applied to both the heatsink and module mounting
surfaces and spread to a uniform depth of .002” to eliminate all air
pockets.
• The module should be mounted to the heatsink using two #10 screws.
Outline Dimensions
1.850
(47.0) _1.700
(43.18)
1.000
(25.4)
LED INDICATOR
1.100
.470 (27.94)
(11.9)
1.750
(44.45)
.870
(22.1)
.875
(22.23)
2.250
(57.15)
.785
(19.94)
.250
(6.35)
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
1105
Refer to inside back cover.