LTP190SS Datasheet, PDF (13/16 Pages) Tyco Electronics – PolySwitch Resettable Devices Strap Battery Devices

Table B5 Physical Characteristics and Environmental Specifications for Strap Battery Devices
LR4
Physical Characteristics
Lead material
Tape material
0.125mm nominal thickness, quarter-hard nickel
Polyester
Environmental Specifications
Test
Passive aging
Humidity aging
Vibration
Conditions
70°C, 1000 hours
85°C/85% RH, 7 days
MIL-STD-883D, Method 2026
Resistance Change
±10%
±5%
No change
Cont’d
SRP
Physical Characteristics
Lead material
Tape material
0.125mm nominal thickness, quarter-hard nickel
Polyester
Environmental Specifications
Test
Passive aging
Humidity aging
Vibration
Conditions
70°C, 1000 hours
85°C/85% RH, 7 days
MIL-STD-883C, Test Condition A
Resistance Change
±10%
±5%
No change
miniSMDE
Physical Characteristics
Termination pad materials
Solder-plated copper
Termination pad solderability Meets EIA specification RS186-9E, ANSI/J-STD-002 Category 3
Environmental Specifications
Test
Passive aging
Humidity aging
Thermal shock
Vibration
Reflow conditions
Tape and reel specifications
Conditions
60°C, 1000 hours
85°C, 1000 hours
85°C/85% RH, 100 days
85°C, -40°C (20 times)
125°C, -55°C (10 times)
MIL-STD-883D, Method 2026
260°C for 10-20 seconds
Per EIA 481-1
Resistance Change
±5% typical
±5% typical
±15% typical
-33% typical
-33% typical
No change
Less than R_1MAX
N/A
Note: Storage conditions: 40°C max., 70% RH max.; devices should remain in original sealed bags prior to use. Devices may not meet specified values if these storage conditions are exceeded.
10
RoHS Compliant, ELV Compliant
183