V23333 Datasheet, PDF (1/3 Pages) Tyco Electronics – Connectors for Mini ISO Relays Connectors (Production Europe only)

Accessories
Connectors (Production Europe only)
Connectors for Mini ISO Relays
Catalog 1308028-2
Revised 3-2008
Features
Connectors in 3 different versions
– PCB Socket
With the solderable connector
Mini ISO relays with plug-in
terminals can be mounted on
leadframes. This allows easy
and reasonable replacement
in case of service.
– Connector
5 pole connector with snap-in
pin to lock in frame.
– Connector with Mounting Flap
5 pole connector that can be
mounted individually or inter-
locked. The connector has a
snap-in pin to lock in frame.
The mounting bracket also
allows screw-on.
Please order terminals separately.
For AWG Conversion Table see
page 236.
Please contact Tyco Electronics
for relay application support.
Weight
– PCB Socket
Approx. 7.0 g (0.25 oz.)
– Connector
Approx. 3.9 g (0.11 oz.)
– Connector with Mounting Flap
Approx. 20.6 g (0.71 oz.)
333_3Dco1
Conditions
All parametric, environmental and
endurance tests are performed
according to EIA Standard RS-407-A
at standard test conditions unless
otherwise noted:
23°C ambient temperature,
20 - 50% RH, 998.9 ±33.9 hPa.
For general storage and processing
recommendations please refer to our
Application Notes and especially to
Storage in the “Glossary” page 23 or
at http://relays.tycoelectronics.com/
appnotes/
Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of the
relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and to request
our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without notification.
All rights of Tyco Electronics are reserved.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
229