TVA270SA_04 Datasheet, PDF (1/2 Pages) Tyco Electronics – Thyristor Surge Protectors

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
SiBar^TM
Thyristor Surge Protectors
PRODUCT : TVA270SA
DOCUMENT: SCD 24788
PCN: 854604
REV LETTER: F
REV DATE: AUGUST 23, 2004
PAGE NO.: 1 OF 2
Specification Status: Released
PHYSICAL DESCRIPTION
Marking:
REAB ^{Date Code}
Device Code
Raychem Logo
A
B
C
D**
H
J
K
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
mm: 4.06 4.57 2.29 2.92 1.91 2.40 1.27 1.63 0.05 0.15 0.15 0.41 0.76 1.52
in*: (0.160) (0.180) (0.090) (0.115) (0.075) (0.095) (0.050) (0.064) (0.002) (0.006) (0.006) (0.016) (0.030) (0.060)
P
S
REF MIN MAX
mm: 0.51 4.83 5.59
in*: (0.020) (0.190) (0.220)
*Rounded off approximation
** D DIMENSION SHALL BE MEASURED WITHIN DIMENSION
Other Physical Characteristics
Form Factor:
SMA (Surface Mount, JEDEC DO-214AC Package)
Lead Material:
Tin/lead finish
Encapsulation Material:
Epoxy, meets UL94 V-0 requirements
Solderability:
per MIL-STD-750, Method 2026
Solder Heat Withstand:
per MIL-STD-750, Method 2031
Solvent Resistance:
per MIL-STD-750, Method 1022
Mechanical Shock:
per MIL-STD-750, Method 2016
Vibration:
per MIL-STD-750, Method 2056
Agency Recognition:
Precedence:
CAUTION:
Materials Information
ELV Compliant
UL
This specification takes precedence over documents referenced herein.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
© 2004 Tyco Electronics Corporation. All rights reserved.