TS600-200-RA-B-0.5 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices

308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
www.circuitprotection.com
PolySwitch®
PTC Devices
Overcurrent Protection Device
Raychem Circuit Protection Products
PRODUCT: TS600-200-RA-B-0.5
DOCUMENT: SCD 24211
PCN: 045845, C02530
REV LETTER: J
REV DATE: MAY 8, 2007
PAGE NO.: 1 OF 1
Specification Status: RELEASED
Max Electrical Rating at 20°C
Operating Voltage: 60V_DC
Interrupt Current: 3A_RMS
Fault Voltage: 600V_RMS
Terminal Material: Tin plated brass
Case Material: 1000 V Dielectric rating
Marking:
T20
Raychem Logo
Part Identification
Lot Identification
TABLE I. DIMENSIONS:
A
B
C
D
E
F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
mm: 18.29 19.43 11.56 12.32 7.24 8.26 1.65 2.41 9.91 10.41 1.52 2.29
in*: (0.720) (0.765) (0.455) (0.485) (0.285) (0.325) (0.065) (0.095) (0.390) (0.410) (0.060) (0.090)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS @ 20°C (unless otherwise noted):
IHOLD (A)
RESISTANCE (Ω)
TIME TO TRIP(s) OPERATING
20°C 70°C R MIN R MAX R₁Inst* R₁ MAX**
@ 1A
TYP
Temperature (°C)
MIN MAX
0.200 0.110
4.0
7.5
13.5
13.5
12
-40
85
*Post Reflow Resistance, measured after one hour.
**Maximum device resistance at 20°C measured 1 hour post trip.
Power
Dissipation
Watts, Typical
2.5
Resistance Matched 0.5 Ohm
Agency Recognition:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
CSA, UL Recognition file #E74889
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
© 2006, 2007 Tyco Electronics Corporation. All rights reserved.