TR600-160-RA Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch PTC Devices, Overcurrent Protection Device

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
FAX [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: TR600-160-RA
DOCUMENT: SCD 24953
PCN: 041478
REV LETTER: A
REV DATE: JANUARY 29, 2002
PAGE NO.: 1 OF 1
Specification Status: Released
Max Electrical Rating at 20°C
Operating Voltage: 250V_DC
Fault Voltage: 600V_RMS
Interrupt Current: 3A_RMS
Lead Material :
22 AWG Sn/Pb plated copper
Marking:
600
160
Raychem Logo
and Voltage
Part Identification
Lot Identification
A
C
FB
D
E
CENTER TO CENTER
TABLE I. DIMENSIONS:
A
B
C
D
MIN MAX MIN MAX MIN MAX MIN MAX
mm: --
16.0
--
12.6
--
6.0 4.7
--
in:
-- (0.630) -- (0.496) -- (0.236) (0.185) --
E
NOM
5.0
(0.197)
F
MIN MAX
10.0
(0.394)
TABLE II. PERFORMANCE RATINGS @ 20°C (unless otherwise noted):
IHOLD (A)
20°C
60°C
RESISTANCE (Ω)
R MIN R MAX R1 MAX*
TYPICAL
TIME TO TRIP (S)
@ 1A
TYP
OPERATING
TEMPERATURE (°C)
MIN
MAX
0.160
0.100
4.0
7.0
16.0
9.5
-40
85
* Maximum device resistance @ 20°C measured 1 hour post trip.
Storage Temperature: -40° to 85°C
Reference Documents:
Precedence:
Effectivity:
CAUTION:
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.