T9A Datasheet, PDF (1/3 Pages) Tyco Electronics – 1 pole 30 A, 1 NO or 1 CO contact

General Purpose Relays
Power Relay T9A
n 1 pole 30 A, 1 NO or 1 CO contact
n High breaking capacity 7200 VA
n PCB- and PCB/quick connect terminals
n Chassis mount version with quick connect terminals
n UL-class F as standard
n Ambient temperature 85°C
Applications
HVAC, power supplies, domestic apppliances, measurement &
control
Approvals
U C E22575, LR15734
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Type of interruption
Rated voltage / max. switching voltage AC
Rated current NO / NC contact
Contact material
Minimum contact load
Operate- / release time including bounce time
1 NO contact
1 CO contact
single contact
micro disconnection
240 / 277 VAC
30 A
20 / 10 A
AgCdO, AgSnOInO
W 1A, 5VDC / 12 VAC
max. 15 / 15ms
Contact ratings
Type
Contact Load
UL 508
T9A AgCdO NO
T9A AgCdO NO
T9A AgCdO CO
T9A AgCdO CO
T9A AgSnOInO NO
30 A, 240 VAC, general purpose
15 A 240 VAC, resistive
30 A / 20 A 240 VAC, resistive
20 A / 10 A 28 VDC, resistive
30 A, 240 VAC, general purpose
Ambient Cycles
temp. [°C]
85°C
105°C
25°C
25°C
25°C
100x10³
100x10³
6x10³
100x10³
100x10³
Coil data
Rated coil voltage range DC coil
For AC coil version please refer to T9C datasheet
5...48 VDC
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
c
mW
6
6
4.5
0.6
36+10%
1000
12
12
9.0
1.2
144+10%
1000
24
24
18.0
2.4
576+10%
1000
48
48
36.0
4.8
2304+10%
1000
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Insulation
Insulation resistance coil-contact circuit
Dielectric strength coil-contact circuit
open contact circuit
Clearance / creepage coil-contact circuit
> 10⁹ Ohms
2500 Vrms
1500 Vrms
W 2.5 / 4 mm; W3.1 / 6.3 mm (UL508)
SCHRACK
T9AGp
Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
1
Dimensions are in mm unless Product specification
processing information only in the ‘Schrack’ section.
otherwise specified and are
according to IEC 61810-1.
to be used together with the
shown for reference purposes Product data, technical para- 'Definitions' section in the cat- Specifications subject to
only.
meters, test conditions and
alogue or at schrackrelays.com change.