SW-461 Datasheet, PDF (1/3 Pages) Tyco Electronics – 4x6 RF Switch Matrix 800 - 900 MHz

4x6 RF Switch Matrix
800 - 900 MHz
Features
• High Isolation: 40 dB
• Low Current draw: < 2mA @ +5 V
< 10mA @ -5V
• 5V CMOS Logic
• 45mm PBGA Package
• JEDEC MO-151 Foot Print
PBGA Package Outline
Description
M/A-COM’s SW-461 is a multi-chip module containing six
SP4T GaAs switches, each with a driver/decoder and four
GaAs 6-way power dividers. The SW-461 utilizes Plastic Ball
Grid Array (PBGA) interconnect technology to achieve high
circuit density and superior high frequency performance. This
device is ideal for telephony applications in the AMPS
frequency bands.
The SW-461 is constructed with a multi layer PCB using a ball
grid array for the I/O connects. The combination of several
state-of-the-art technologies achieves high performance at a low
cost.
Ordering Information
Part Number
Package
SW-461
45mm PBGA Package
SW-461
Electrical Specifications: T_A = +25°C¹, Control Voltage = +5.0V=
Parameter
Insertion Loss
VSWR
800 - 900 MHz
800 - 900 MHz
Test Conditions
Isolation
Balance
P_1dB
800 - 900 MHz
800 - 900 MHz
800 - 900 MHz
Units
dB
dB
dB
dBm
1. All measurements in a 50Ω system.
Specifications subject to change without notice.
North America: Tel. [phone], Fax [phone]
Asia/Pacific: Tel.[phone], Fax [phone]
Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.
Min.
42
Typ.
-11.5
1.5:1
57
0.7
33
Max.
-12
1.9:1
1.2
V2.00
V 2.0