SW-209 Datasheet, PDF (1/2 Pages) Tyco Electronics – Matched GaAs SPST Switch DC - 3 GHz

Matched GaAs SPST Switch
DC - 3 GHz
Features
q Fast Switching Speed, 6 ns Typical
q Ultra Low DC Power Consumption
q Small Package Size, 0.180" (4.6mm) Sq.
Guaranteed Specifications¹ (-55°C to + 85°C)
Frequency Range
DC – 3.0 GHz
Insertion Loss
DC – 3.0 GHz
DC – 2.0 GHz
DC – 1.0 GHz
DC – 0.5 GHz
1.5 dB Max
1.2 dB Max
1.1 dB Max
0.9 dB Max
VSWR
DC – 3.0 GHz
DC – 2.0 GHz
DC – 1.0 GHz
DC – 0.5 GHz
1.6:1 Max
1.5:1 Max
1.2:1 Max
1.2:1 Max
Isolation
DC – 3.0 GHz
DC – 2.0 GHz
DC – 1.0 GHz
DC – 0.5 GHz
27 dB Min
32 dB Min
40 dB Min
45 dB Min
Operating Characteristics
Impedance
50 Ohms Nominal
Switching Characteristics
Trise, Tfall
Ton, Toff (50% CTL to 90%/10% RF)
Transients (In-Band)
3 ns Typ
6 ns Typ
30 mV Typ
Input Power for 1 dB Compression
Control Voltages (Vdc)
0/-5
0/-8
0.5 – 3.0 GHz
0.05 GHz
+27
+33
dBm Typ
+21
+26
dBm Typ
Intermodulation Intercept Point
(for two-tone input power up to +13 dBm)
Intercept Points
IP2
IP3
0.5 – 3.0 GHz
+62
+40
dBm Typ
0.05 GHz
+68
+46
dBm Typ
Control Voltages (Complementary Logic)
Vin Low
0 to -0.2V @ 20 µA Max
Vin High
-5V @ 50 µA Typ to -8V @ 300 µA Max
1. All specifications apply with 50 ohm impedance connected to all RF ports
with 0 and -5 Vdc control voltages.
Ordering Information
Model No.
SW-209 PIN
SW-209B PIN
SW-209G PIN
Package
Ceramic (CR-3)
Screened To MIL-STD-
883C, Method 5008.4,
Table VII, Class B Hybrid
Ceramic Gull Winged
(CR-10)
CR-3
CR-10
SW-209
V 2.00