SW-121 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPST RF Switch 10 - 1000 MHz

SPST RF Switch
10 - 1000 MHz
Features
q Low Loss - 0.5 dB Typical
q High Isolation - 60 dB Typical
q Integral TTL Driver
q Hermetic Package
Guaranteed Specifications*
(-55°C to + 85°C)
DI-1
0.87
(22.1 Ï® 0.5)
CTL
RF 1 – +
SW-121
V2.00
RF2
0.018 ±0.005
(0.46 ±0.13) DIA.
14 PINS
0.100
(2.5) TYP
0.200
(5.1) MAX
0.120
(3.0) MIN
Operating Characteristics
0.300
(7.6)
0.50
(12.7 Ï® 0.5)
0.10
(2.5 Ϯ0.5)
0.13
(3.3Ϯ0.5)
(Positive Voltage Only)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ± 0.010 (.xx = ±0.25)
.xx = ± 0.02 (.x = ± 0.5)
WEIGHT (APPROX): 0.14 OUNCES 4 GRAMS
Typical Performance
MIL-STD-883 screening available.
* All specifications apply when operated with bias voltages of +12 VDC and
-5 VDC (± 5%) and 50 ohm impedance at all RF ports.
Ordering Information
Truth Table
Specifications Subject to Change Without Notice.
M/A-COM, Inc.
North America: Tel. [phone]
Fax [phone]
s Asia/Pacific: Tel. [phone]
Fax [phone]
1
s Europe: Tel. [phone]
Fax [phone]