ST3FLC4 Datasheet, PDF (1/2 Pages) Tyco Electronics – Accessories Slim Interface Relay SNR

General Purpose Relays
Accessories Slim Interface Relay SNR
I Module width 6.2 mm
I Reduced system width for increased packing density on the
DIN rail
I DC and AC version
I Electrical indicator as standard (LED)
I Protection circuit
I Screw- or cage clamp terminals
I Jumper bars
I RoHS compliant (Directive 2002/95/EC)
F0260-A
Approvals
V Z REG.-Nr. 6666,
E224918
Technical data
Rated current
Rated voltage / max.switching voltage AC
Dielectric strength coil-contact circuit
Clearance / creepage coil-contact circuit
Material group of insulation parts
Insulation to IEC 60664-1
Type of insulation coil-contact circuit
open contact circuit
Rated insulation voltage
Pollution degree
Rated voltage system
Overvoltage category
RoHS - Directive 2002/95/EC
Degree of protection DIN 40050
Ambient temperature range
Terminals
Terminal screw torque acc. IEC 61984
max.
Wire cross section
single wire
fine wire
with bootlace crimp (DIN 46228/1)
Insertion cycles
Max. Insertion Force total
Mounting distance
Weight
Packaging unit
ST3F / ST4F
6A
240 / 400 VAC
4000 Vrms
W 6/8 mm
W IIIa
reinforced
functional
250 V
2
230 / 400 V
III
compliant
IP20
-20...+55 °C
screw / cage clamp
0.5 Nm
0.6 Nm
0.14...2.5 mm²
0.14...2.5 mm²
0.14...2.5 mm²
A (10)
100 N
0 mm, dense packing
26 g
10 pcs
S0487-AA
Sockets
Product code
ST 3F LC4
ST 3F SM5
ST 3F TP0
ST 4F LC4
ST 4F SM5
ST 4F TP0
Part Number
Din-rail socket 24VDC, for relays 12 / 24 / 48 VDC,
2-1416100-0
with LED, protection and polarity diode, screw terminals
Din-rail socket 115 VAC / VDC with LED and
2-1416100-1
protection circuit, screw terminals
Din-rail socket 230 VAC / VDC with LED and
2-1416100-2
protection circuit, screw terminals
Din-rail socket 24VDC, for relays 12 / 24 / 48 VDC,
2-1416100-3
with LED, protection and polarity diode,
cage clamp terminals
Din-rail socket 115 VAC / VDC with LED and
2-1416100-4
protection circuit, cage clamp terminals
Din-rail socket 230 VAC / VDC with LED and
2-1416100-5
protection circuit, cage clamp terminals
S0487-AA
Version with
screw terminals
Version with
cage clamp terminals
Datasheet
Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.