SR6 Datasheet, PDF (1/4 Pages) Tyco Electronics – General Purpose Relays

General Purpose Relays
Safety Relay SR6
I 6 pole safety relay with either
4 NO+2 NC or 3 NO+3 NC or 5 NO+1 NC contacts
I Forcibly guided contacts according to EN50205
I Rated current 8 A
I coil power 800 mW or 1200 mW
I RoHS compliant (Directive 2002/95/EC)
Applications
Emergency shut-off, press control, machine control, elevator
and escalator control, safety modules
Approvals (in preperation)
V Z T REG.-Nr. 128935,
E214024,
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Type of interruption
Rated current
Rated voltage / max.switching voltage AC
Maximum breaking capacity AC
Contact material 800 mW version
1200 mW version
Minimum contact load
Contact resistance
Mechanical endurance
Rated frequency of operation with / without load
3 NO contacts and 3 NC contacts
4 NO contacts and 2 NC contacts
5 NO contacts and 1 NC contact
single contact, forcibly guided
type A according to EN 50205
micro disconnection
8A
240 / 400 VAC
2000 VA
AgSnO2 + 0,2 μm Au
AgSnO2
10 mA / 5 V
w 100 mOhm / 1 A / 24 VDC
w 20 Ohm / 10 mA / 5 VDC
10x10⁶ cycles
6 min^-1 / 150 min^-1
Contact ratings
Type
SR6 NO contact
SR6 NC contact
SR6 NO contact
SR6 NO contact
Load
8A, 250VAC, resistiv, 70°C, EN61810-1
8A, 250VAC, resistiv, 70°C, EN61810-1
5A, 250VAC, AC15, 70°C, EN60947-5-1
5A, 24VDC, DC13, 25°C, EN60947-5-1
Cycles
50x10³
20x10³
50x10³
45x10³
Coil data
800 mW
1200 mW
Rated coil voltage range DC coil
5...110 VDC
Coil power DC coil
appr. 800 mW
appr. 1200 mW
Operative range
2
Coil versions, 800 mW, DC-coil
Coil code Nominal Pull-in
Release
Coil
Rated coil
Order. code voltage voltage
voltage
resistance
power
block 4
VDC
VDC
VDC
c
mW
K05
5
3.8
0.5
31+10%
806
K06
6
4.5
0.6
45+10%
800
K09
9
6.8
0.9
101+10%
802
K12
12
9.0
1.2
180+10%
800
K18
18
13.5
1.8
405+10%
800
K21
21
15.8
2.1
551+10%
800
K24
24
18.0
2.4
720+10%
800
K36
36
27.0
3.6
1620+10%
800
K40
40
30.0
4.0
2000+10%
800
K48
48
36.0
4.8
2880+10%
800
K60
60
45.0
6.0
4500+10%
800
K85
85
63.8
8.5
9031+10%
800
L10
110
82.5
11.0
15130+10%
800
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. FC1
Issued 2006/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
F0206-DS
1
‘Schrack’ section.
Specifications subject to
change.