SMD150F_3 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices Overcurrent Protection Device

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: SMD150F
DOCUMENT: SCD 25640
PCN: 888758
REV LETTER: B
REV DATE: MARCH 28, 2005
PAGE NO.: 1 OF 1
Specification Status: Released
Maximum Electrical Ratings
Operating Voltage / Interrupt Current
15V / 40A
12V / 60A
5V / 125A
H
B
Marking:
D
E
A
C
G
F
Notes:
1. All metal surfaces are tin plated.
2. Devices cannot be wave soldered.
3. Drawing not to scale.
TABLE I. DIMENSIONS:
A
B
C
D
E
F
G
H
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN
mm: 8.00 9.40 -- 3.00 6.0 6.71 0.56 0.71 0.56 0.71 3.68 3.94 0.66 1.37 0.43
in*: (0.315) (0.370) -- (0.118) (0.236) (0.264) (0.022) (0.028) (0.022) (0.028) (0.145) (0.155) (0.026) (0.054) (0.017)
TABLE II. PERFORMANCE RATINGS:
CURRENT RATINGS**
AMPS
AT 0°C
HOLD TRIP
1.80 3.60
AMPS
AT 20°C
HOLD TRIP
1.50 3.00
AMPS
AT 60°C
HOLD TRIP
0.99 1.98
TIME TO
TRIP**
SECONDS AT
20°C, 8.0A
MAX
5.0
RESISTANCE
VALUES
OHMS
AT 20°C
MIN MAX*
0.060 0.250
TRIPPED-STATE
POWER
DISSIPATION**
WATTS AT
20°C
MAX
1.9
* Maximum resistance is measured both 1 hour post reflow and 1 hour post trip.
** Values specified were determined using PCB’s with 0.070”X1.5 ounce copper traces.
Agency Recognition:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
UL, CSA, TÜV
PS300, E.N. SMD 1.0x
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant
ELV Compliant
Pb-Free
© 2005 Tyco Electronics Corporation. All rights reserved.