S200-1-W1-22-9 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS IMMERSION RESISTANT, 200 DEG C ROHS COMPLIANT

CUSTOMER DRAWING
Product
Name
S200-1-W1-22-9
S200-2-W1-22-9
S200-3-W1-22-9
S200-4-W1-22-9
S200-5-W1-22-9
1
Ident.
Code
S2001R
S2002R
S2003R
S2004R
S2005R
3
2
3
Product Dimensions
L±1.75
øB
øC
(L±0.075) ^min
min
16.50
1.90
2.67
(0.650) (0.075) (0.105)
16.50
2.67
3.68
(0.650) (0.105) (0.145)
16.50
4.32
5.08
(0.650) (0.170) (0.200)
19.10
5.97
6.48
(0.750) (0.235) (0.255)
19.10
6.98
7.62
(0.750) (0.275) (0.300)
4
øD
max
1.90
(0.075)
2.67
(0.105)
4.32
(0.170)
5.97
(0.235)
6.98
(0.275)
Cable Dimensions
øE
øF
max
min
2.67
0.90
(0.105) (0.035)
3.68
1.40
(0.145) (0.055)
5.08
2.15
(0.200) (0.085)
6.48
3.30
(0.255) (0.130)
7.62
4.30
(0.300) (0.170)
øG
min
0.50
(0.020)
0.75
(0.030)
1.25
(0.050)
1.80
(0.070)
2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn96 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
THERMAL INDICATOR: Fusible ring.
3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue.
4. PRE-INSTALLED LEAD: Stranded silver-plated copper in accordance with SAE-AS22759/91-22-9. Color: white.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150°C minimum, meeting the
dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material.
2. Install using Tyco Electronics approved convection or infrared heating tools in accordance with Tyco Electronics process
standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the
performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets.
3. Parts shall be marked with identification code per table.
4. Temperature range: -65°C to +200°C.
For best results, prepare the cable as shown:
“G” is the minimum diameter on which the sleeve will seal.
300 Constitution
Dr
Menlo Park, CA
94025, U.S.A.
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS,
IMMERSION RESISTANT, 200 DEG C,
ROHS COMPLIANT
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
Raychem
Devices
DOCUMENT NO.:
S200-X-W1-22-9
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to
0.00 N/A
amend this drawing at any time. Users _REV:
0.0 N/A
0 N/A
ROUGHNESS
IN MICRON
should evaluate the suitability of the
product for their application.
C
DATE:
June 2, 2009
REVISED BY:
CAGE CODE: ECO NUMBER:
YUNGUYEN
06090
ECO-09-013095
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
Print Date: 2-Jun-09
© 2005-2009 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.