English
Language : 

S10 Datasheet, PDF (1/2 Pages) Tyco Electronics – 10 to 500 MHz THIN FILM SPST SWITCH
S10
10 to 500 MHz
THIN FILM SPST SWITCH
• LOW INSERTION LOSS: < 2.5 dB (TYP.)
• HIGH ON/OFF RATIO: 60 dB (TYP.)
• LOW VSWR: 1.6:1 (TYP.)
• TTL COMPATABLE
Specifications (Rev. Date: 3/02)*
Characteristics
Insertion Loss (max.)
10-100 MHz
100-300 MHz
300-500 MHz
Isolation
10-100 MHz
100-300 MHz
300-500 MHz
VSWR Input/Output (max.) in ON state
10-500 MHz
Switching Speed (10-90%)
DC Current (max.) at ±0.7 V
*Measured in a 50-ohm system.
Typical
< 1. 7 dB
< 2.0 dB
< 2.5 dB
> 67 dB
> 62 dB
> 48 dB
1.9:1
2 ns
±20 mA
Guaranteed
0° to 50°C -54° to +85°C
2.3 dB
2.6 dB
4.0 dB
2.7 dB
3.0 dB
4.5 dB
54 dB
50 dB
39 dB
52 dB
48 dB
36 dB
2.4:1
5ns
2.6:1
6 ns
Schematic Diagram
Absolute Maximum Ratings
Ambient Operating Temperature
Storage Temperature
Max. Case Temperature
Max. DC Voltage
Max. Continuous RF Input Power
Max. Short Term RF Input Power
Max. Peak Power (1 minute max.)
“S” Series Burn-in Temperature (Case)
-54° to +125°C
-62°C to +125°C
125°C
+6 Volts
+10 dBm
100 mW
1W
125°C
Switching Conditions
ON State Off State
+20 mA
-20 mA
≈ +0.7 V
≈ -0.7 V
Outline Drawings
Package
TO-8
Figure
BD
Model
S10
M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or information.
North America: 1-800-366-2266
Visit www.macom.com for complete contact and product information.