S03-05-R-100 Datasheet, PDF (1/1 Pages) Tyco Electronics – SPECIFICATION CONTROL DRAWING

SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
S03-01-R D
S03-02-R D
S03-03-R D
S03-04-R D
S03-05-R D
Ident.
Code
S0301R
S0302R
S0303R
S0304R
S0305R
Component Dimensions
L1.75
øB
øC
(L0.070) min
min
16.50
1.90
2.65
(0.650) (0.070) (0.105)
16.50
(0.650)
2.65
3.68
(0.105) (0.145)
16.50
4.30
5.08
(0.650) (0.170) (0.200)
19.10
5.95
6.45
(0.750) (0.235) (0.255)
19.10
7.00
7.60
(0.750) (0.275) (0.300)
H
min
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
Shall Accommodate Cable with Dimensions
øE
øF
øD
max
min
max
2.65
0.90
1.90
(0.105)
(0.035)
(0.075)
3.68
(0.140)
1.40
(0.055)
2.65
(0.105)
5.08
2.15
4.30
(0.200)
(0.085)
(0.170)
6.45
3.30
5.95
(0.255)
(0.130)
(0.235)
7.60
4.30
7.00
(0.300)
(0.170)
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED BRAID: Tin-plated copper strands. CMA 640.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting
the dimensional criteria listed and having tin or silver-plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult TE Connectivity/Raychem.
2. When installed per TE Connectivity /Raychem process standard RCPS-100-70, assemblies will meet those requirements of
TE Connectivity /Raychem Specification RT-1404 and MIL-S-83519/2, which do not require electrical testing while parts are
immersed in water.
3. Temperature range: -55C to +150C.
4. Parts shall be marked with identification code per table.
For best results, prepare the cable as shown:
SolderSleeve is a trademark of TE Connectivity.
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE DEVICES SHIELD
TERMINATION WITH PRE-INSTALLED
BRAID
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DOCUMENT NO.:
S03-01/-05-R
TOLERANCES: ANGLES: N/A
TE Connectivity reserves the right to amend
0.00 N/A
0.0 N/A
0 N/A
ROUGHNESS IN
MICRON
this drawing at any time. Users should evaluate
the suitability of the product for their
application.
DRAWN BY:
CAGE CODE: REPLACES:
DCR NUMBER:
M. FORONDA
06090
D982098
D030251
PROD. REV.:
SEE TABLE
SCALE:
None
DOC. ISSUE:
5
SIZE:
A
DATE:
15-Apr-11
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.