English
Language : 

S02-07-R-92 Datasheet, PDF (1/1 Pages) Tyco Electronics – SOLDERSLEEVE SHIELD TERMINATION ENVIRONMENT RESISTANT WITH LEAD
SPECIFICATION CONTROL DRAWING
Product Revision
Component Dimensions
Product
Ident. L±1.75
øB
øC
H
øD
Name
Code (L±0.07) min
min
min
max
S02-07-R-XX * SIZE2R 16.5
2.65
3.68
8.25
2.65
(0.650) (0.105) (0.140) (0.325) (0.105)
S02-08-R-XX * SIZE3R 16.5
4.30
5.08
8.25
4.30
(0.650) (0.170) (0.200) (0.325) (0.170)
S02-10-R-XX * SIZE5R 19.1
7.00
7.60
8.25
7.00
(0.750) (0.275) (0.300) (0.325) (0.275)
* Consult Raychem for individual product revision. Contains more than 1 part name.
Cable Dimensions
øE
øF
max
min
3.68
(0.140)
1.40
(0.055)
5.08
(0.200)
2.15
(0.085)
7.60
(0.300)
4.30
(0.170)
øG
max
0.72
(0.030)
1.25
(0.050)
2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED LEAD: MIL-W-22759/32-22-XX*. (Raychem 55A0111-22-XX*)
*XX: Part name and lead callout shall be replaced with lead color designation per MIL-STD-681.
Colors available: solid and with single stripe.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 105°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see SAE-AS83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem
Specification RT-1404 and SAE-AS83519/2.
3. For assembly information, refer to Raychem document RCPS-100-70.
4. Parts shall be marked with identification code per table.
For best results,prepare the cable as shown:
- Strip length of shield: 6.35 – 8.25 (.250 - .325)
- Use methods (a) or (b) with cable rated for 125°C and above. Use method (c) for cables rated for 105°C and cable with spiral
wrapped shields.
a) Window Strip
b) End Strip
c) End Strip with Fold Back
300 Constitution Drive
Menlo Park, CA 94025, USA
THERMOFIT
DEVICES
TITLE:
SOLDERSLEEVE SHIELD TERMINATION
ENVIRONMENT RESISTANT WITH LEAD
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: S02-07/-08/-10-R-XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for
their application.
DCR NUMBER:
D000419
REPLACES:
N/A
DRAWN BY:
M. FORONDA
DATE:
27-Sept-00
PROD. REV.
SEE TABLE
DOC ISSUE:
2
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 12-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision