English
Language : 

RY210005_05 Datasheet, PDF (1/3 Pages) Tyco Electronics – Miniature Power PCB Relay RY II
General Purpose Relays
Miniature Power PCB Relay RY II
I 1 pole 8 A, 1 CO or 1 NO or 1 NC contact
I Low component height 12.3 mm
I 5 kV / 8 mm coil-contact
I Reinforced insulation (protection class II)
I Pinnings: 3.2 and 5 mm
I Sockets with PCB-type or screw-type terminals
I Especially suitable for resistive and inductive loads on NO and NC contacts
I Plastic materials according to IEC60335-1 (domestic appliances)
I RoHS compliant (Directive 2002 / 95 / EC) as per product date code 0403
Applications: heating control, interface technology, domestic appliances,
F0142-C
timers, temperature control
Approvals
V Z REG.-Nr. 5358,
E214025
Technical data of approved types on request
Contact data
Contact configuration
Contact set
Type of interruption
Rated current
Rated voltage / max.switching voltage AC
Maximum breaking capacity AC
Contact material
Mechanical endurance
Rated frequency of operation with / without load
1CO or 1NO or 1NC
single contact
micro disconnection
8A
240/400 VAC
2000 VA
AgNi0,15, AgSnO2, AgCdO
30x106 cycles
6 / 1200 min-1
Contact ratings
Type Load
RY610 B300, 120 VAC, 70°C, UL508
RY610 B300, 240 VAC, 70°C, UL508
RY610 1/4 hp, 120 VAC, 70°C, UL508
RY610 1/2 hp, 240 VAC, 70°C, UL508
RY610 8 A, 28 VDC,70°C, UL508
RY610 0.28 A, 250 VDC, 70°C, UL508
RY531 6 (4) A,250 VAC, 85°C, VDE 0631
Cycles
>3x104
>3x104
1x105
Coil data
Rated coil voltage range DC coil
Coil power DC coil
Operative range
5...60 VDC
typ. 220 mW
2
Coil versions, DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
Ohm
mW
005
5
3.5
0.5
112+10%
223
006
6
4.2
0.6
162+10%
222
009
9
6.3
0.9
320+10%
253
012
12
8.4
1.2
627+10%
230
024
24
16.8
2.4
2350+10%
245
048
48
33.6
4.8
9391+10%
245
060
60
42.0
6.0
14000+10%
257
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.