RTS3L005 Datasheet, PDF (1/4 Pages) Tyco Electronics – Power PCB Relay RT1 Inrush Power

General Purpose Relays
Power PCB Relay RT1 Inrush Power
I 1 pole 16 A, 1 NO contact (W pre-make contact + AgSnO₂)
I 10 A / 250 VAC making and breaking capacity acc. to IEC 60669-1
I 165 A / 20 ms inrush peak current
I Mono- or bistable coil
I 5 kV / 10 mm coil-contact
I Reinforced insulation
I Optional test tab (manual operator)
I RoHS compliant (Directive 2002/95/EC)
Applications
Lighting systems, movement sensors, filament and incandescent lamp loads,
motors
Approvals
V Z REG.-Nr. 6106,
E214025
Technical data of approved types on request
Contact data
RT.3T
RTS3L
Contact configuration
1 NO
Contact set
pre-make contact single contact
Type of interruption
micro disconnection
Rated current
16 A
Rated voltage / max.switching voltage AC
250/400 VAC
Limiting continuous current
16 A
Maximum breaking capacity AC
4000 VA
Limiting making capacity
max 20 ms (incandescent lamps)
165 A
120 A
max 200 μs (fluorescent lamps)
800 A
-
Contact material
W (pre-make cont.)+AgSnO2 AgSnO2
Mechanical endurance DC
> 5x10⁶ cycles
> 10x10⁶ cycles
bistable
> 3x10⁶ cycles
> 5x10⁶ cycles
tab manually operated > 10³ cycles
-
Rated frequency of operation with / without load
6 / 60 min^-1
Contact ratings
Type Load
RTS3T 3000 W, 230 VAC, DF 8,3%, 5 min^-1, incandescent lamp
RT*3T 16 A, 250 VAC, capacitive load 140 μF, 7,5 min^-1, EN60669-1
RT*3T TV5, UL508, 40°C
RTS3L 16 A, 250 VAC, 85°C
RTS3L 1.5 hp, 240 VAC
RTS3L TV8, UL508, 40°C
RTS3L 10/100 A / 250 VAC, simulated lamp load, acc. to IEC 61810-2
Cycles
typ. 12x10³
> 20x10³
25x10³
> 100x10³
25x10³
20x10³
Coil data
Coil data, monostable coil
Rated coil voltage range
Coil power
Operative range
Coil insulation system according UL1446
5...110 VDC
typ 400 mW
2
class F
Coil versions, monostable DC-coil
Coil
Rated
Operate
Release
Coil
Rated coil
code
voltage
voltage
voltage
resistance
power
VDC
VDC
VDC
c
mW
005
5
3.5
0.5
62+10%
403
006
6
4.2
0.6
90+10%
400
012
12
8.4
1.2
360+10%
400
024
24
16.8
2.4
1440+10%
400
048
48
33.6
4.8
5520+10%
417
060
60
42.0
6.0
8570+12%
420
110
110
77.0
11.0
28800+12%
420
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request
Datasheet
Rev. EK1
Issued 2005/11
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
F0272-A
1
‘Schrack’ section.
Specifications subject to
change.