RT114024_08 Datasheet, PDF (1/3 Pages) Tyco Electronics – Interface Power Relay RT

General Purpose Relays
Interface Power Relay RT
I 1 pole 12 / 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts
I DC- or AC coil
I Sensitive coil 400 mW
I Reinforced insulation, protection class II (VDE 0700)
I 5 kV / 10 mm coil-contact
I 1 pole 12 A with 3.5 or 5 mm pinning
I Recycleable packaging
Applications
Panel boards, mechanical engineering
Approvals
V Z REG.-Nr. 6106,
E214025
Technical data of approved types on request
Contact data
1-pole
2-pole
Contact configuration
1 CO
2 CO
Contact set
single contact
Type of interruption
micro disconnection
Rated voltage / max. switching voltage AC
240 / 400 VAC
Rated current
12 / 16 A
8A
Maximum breaking capacity AC
3000 / 4000 VA
2000 VA
Limiting making capacity,max 4 s, df 10%
25 / 30 A
15 A
Contact material
AgNi 90/10
Rated frequency of operation DC coil with / without load 6 / 1200 min^-1
AC coil with / without load
6 / 600 min^-1
Operate- / release time DC coil
max 8 / 6 ms
max 10 / 5 ms
Bounce time DC coil, NO / NC contact
max 4 / 6 ms
max 4 / 9 ms
Contact ratings
Type
Contact Load
Ambient
temp. [°C]
IEC 61810
RT314 DC-coil NO
10 A, 400 VAC, cosϕ=1
85°C
RT314 AC-coil NO
16 A, 250 VAC, cosϕ=1
70°C
RT314 AC-coil CO
16 A, 250 VAC, cosϕ=1
70°C
RT424 AC coil CO
8 A, 250 VAC, cosϕ=1
70°C
UL 508
RT314
NO
16 A, 250 VAC, general purpose, DF: 10% 85°C
RT314
NO
A300
40°C
RT314
NC
B300
40°C
RT314
NO
240 VAC, 1 hp
40°C
RT424 DC coil NO / NC 8 A, 30 VDC, general purpose
85°C
RT424 DC coil NO
10 A, 250 VAC, general purpose
85°C
RT424 DC coil NO / NC motor, 1/2 hp, 240 VAC
85°C
RT424 DC coil NO / NC pilot duty, B300, R300
85°C
EN60730-1
RT314 DC-coil NO
12(2) A, 250 VAC
85°C
RT424 DC coil NO / NC 6(2) A, 250 VAC
85°C
Cycles
150x10³
50x10³
10x10³
30x10³
50x10³
6x10³
6x10³
1x10³
6x10³
30x10³
1x10³
6x10³
100x10³
100x10³
Coil data
Rated coil voltage range DC coil
AC coil
Operative range to IEC 61810
Coil insulation system according UL1446
5...110 VDC
24...230 VAC
2
class F
SCHRACK
F0269-C
Datasheet Rev. HK1
Issued 2008/11
www.tycoelectronics.com
www.schrackrelays.com
1
Dimensions are in mm unless Product specification
processing information only in the ‘Schrack’ section.
otherwise specified and are
according to IEC 61810-1.
to be used together with the
shown for reference purposes Product data, technical para- 'Definitions' section in the cat- Specifications subject to
only.
meters, test conditions and
alogue or at schrackrelays.com change.