RT114024 Datasheet, PDF (1/3 Pages) Tyco Electronics – Interface Power Relay

General Purpose Relays
Interface Power Relay RT
I 1 pole 12 / 16 A, 2 pole 8 A, 1 CO contact or 2 CO contacts
I DC- or AC coil
I Sensitive coil 400 mW
I Reinforced insulation, protection class II (VDE 0700)
I 5 kV / 10 mm coil-contact
I 1pole 12 A with 3.5 or 5 mm pinning
I Recycleable packaging
I RoHS compliant (Directive 2002/95/EC)
as per product date code 0413
Applications
Panel boards, mechanical engineering
Approvals
V Z REG.-Nr. 6106,
E214025
Technical data of approved types on request
Contact data
1-pole
2-pole
Contact configuration
1 CO
2 CO
Contact set
single contact
Type of interruption
micro disconnection
Rated current
12 / 16 A
8A
Rated voltage / max.switching voltage AC
240/400 VAC
Maximum breaking capacity AC
3000 / 4000 VA
2000 VA
Limiting making capacity,max 4 s, df 10%
25 / 30 A
15 A
Contact material
AgNi 90/10
Mechanical endurance DC coil
> 30 x 10⁶
>30 x 10⁶
AC coil
> 10 x 10⁶
>5 x 10⁶
Rated frequency of operation with / without load
6 / 1200 min^-1
Contact ratings
Type Load
Cycles
RT314 16 A, 250 VAC, NO contact, 85°C, DF 10%, UL508
50x10³
RT314 16 A, 250 VAC, NC contact, 70°C, 30min^-1
53x10³
RT314 16 A, 250 VAC, CO contact, VDE 0435
30 x 10³
RT314 1000 W incandescent lamp, 250 VAC
1.2x10³
RT314 10 A, 250 VAC, cosϕ=0.6, CO contact, 70°C
200x10³
RT314 5 A / 2 A, 250 VAC, cosϕ=1, motor, NO contact, 10min^-1, 70°C
1.1x10⁶
RT314 Pilot duty A300 (NO contact), B300 (CO/NC contact), UL508
RT314 1hp @ 240 VAC, 1/2hp @ 120 VAC, NO contact, UL508
RT314 AC15, 6 A, 250 VAC, NO and NC contact, 85°C, EN60947-5-1
RT314 DC13, 2 A / 24 VDC, 0.2 A / 250 VDC, NO and NC contact, 85°C, EN60947-5-1
RT424 8 A, 250 VAC, NO contact, 70°C, EN61810-1
100x10³
RT424 6(2) A, 250 VAC, NO/NC contact, 85°C; EN60730-1
100x10³
RT424 1/2hp @ 240 VAC, 1/4hp @ 120 VAC, UL508
RT424 Pilot duty B300, UL508
RT424 8 A, 30 VDC, General Purpose, UL508
Coil data
Rated coil voltage range DC coil
AC coil
Coil power DC coil
AC coil
Operative range
Coil insulation system according UL1446
5...110 VDC
24...230 VAC
typ 400 mW
typ 0.75 VA
2
class F
SCHRACK
F0269-B
Datasheet
Rev. HC1
Issued 2008/03
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para-
meters, test conditions and
processing information
only to be used together
with the 'Definitions' at
schrackrelays.com in the
1
‘Schrack’ section.
Specifications subject to
change.