RP827012 Datasheet, PDF (1/2 Pages) Tyco Electronics – Power PCB Relay RPII/2

General Purpose Relays
PCB Relays
Power PCB Relay RPII/2
n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts
n 4kV/8mm coil-contact
n Twin contacts available
n RoHS compliant (Directive 2002/95/EC)
SCHRACK
Typical applications
Domestic appliances, UPS
VZ
F0150-B
Approvals
VDE REG.-Nr. C894, UL E214024
Technical data of approved types on request
Contact Data
Contact arrangement 2 form C (CO) or 2 form A (NO)
Rated voltage
250VAC
Max. switching voltage
400VAC
Rated current
8A (UL: 10A)
Limiting making current, max 4s, duty factor 10% 14A
Breaking capacity max.
2000VA
Contact material
AgCdO, AgNi0.15
Frequency of operation, with/without load
600/72000h^-1
Operate/release time typ.
9/3ms
Bounce time typ., form A/form B
2/3ms
Contact ratings
Type
Contact
IEC61810
RP420/421 A (NO)
RP420
A (NO)
Load
8A, 250VAC, resistive, 35°C
5A, 250VAC, resistive, 70°C
Cycles
100x10³
30x10³
Mechanical endurance
>20x10⁶ operations
Coil Data
Coil voltage range
Operative range, IEC 61810
5 to 110VDC
2
Coil versions, DC coil
Coil
Rated
Operate Release
Coil
Rated coil
code
voltage
voltage
voltage resistance power

VDC
VDC
VDC
Ω±10%¹⁾
mW
005
5
3.5
0.5
54
500
006
6
4.2
0.6
68
500
012
12
8.4
1.2
270
500
024
24
16.8
2.4
1100¹⁾
500
048
48
33.6
4.8
4400¹⁾
500
060
60
42.0
6.0
6540¹⁾
500
110
110
77.0
11.0
23100¹⁾
500
1) Coil resistance ±15%.
All figures are given for coil without pre-energization, at ambient temperature +20°C.
Other coil voltages on request.
Insulation Data
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Clearance/creepage
between contact and coil
Material group of insulation parts
1000V_rms
4000V_rms
2500V_rms
≥8/8mm
IIIa
04-2011, Rev. 0411
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
1
Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec-
terms of the disclaimer and all chapters of
tion, application notes and all specifications
the ‘Definitions’ section, available at
are subject to change.
http://relays.te.com/definitions