ROX1SJ390R Datasheet, PDF (1/2 Pages) Tyco Electronics – Flame-Proof Power Metal Oxide Film Resistors

Flame-Proof Power Metal
Oxide Film Resistors
Type ROX Series
Type ROX Series
The resistive element comprises a
metal oxide film deposited on a
ceramic former. The element is
protected by a flameproof coating
which will withstand overload
conditions without flame or
mechanical damage. They are
recommended for use in applica-
tions such as line protection etc…
Characteristics -
Electrical
ROXO5
Rated Power @ 70°C (W):
0.5
Resistance Range (ohms) Min: 0.1
Max: 330K
Tolerance and Code Letter:
Temp. Coefficient Max (ppm/°C):
Selection Series:
Limiting Element Voltage (V):
250
Maximum Overload Voltage (V): 400
Max Intermittent Overload
500
Voltage (V):
Operating Temp. Range (°C):
Climatic Category:
Dielectric Strength (V):
250
Insulation Resistance (Mohms):
ROX1
1
0.1
470K
350
600
750
ROX2 ROXO5S ROX1SS ROX1S ROX2S ROX3S
2
0.5
1
1
2
3
0.1 0.1 0.1 0.1 0.1 0.1
560K 100K 200R 270K 470K 560K
2% (G) / 5% (J) 1% (F) available on request
± 350
E24
350 250 350 350 350 350
600 400 400 600 600 600
750 500 500 750 750 750
ROX5S
5
0.1
560K
500
800
1500
-55 to +235
55/235/56
350 350 250 350 350 350 350 500
1,000
Dimensions
L
Key Features
■ High Power with Small
Size for Space Saving
■ Excellent Long Term
Stability
■ Complete Flameproof
Construction
■ High Surge/Overload
Capability
■ Controlled Temperature
Capability
■ Solvent Resistant Coat
and Code
■ Special Lead Formations
Possible
d
D
Dimension “l” refers to loose
packaged product only
Standard Range Leaded
Style
ROX05
ROX1
ROX2
D max
3.5
5
5.5
L Max
10
12
16
l+/-3
28
25
28
d+/-0.05
0.54
0.7
0.7
Standard Range Pre-formed
Style P1 ±0.5 P2 ±2 H1
ROXO5 12.5 12.5 7.5 ±1.5
ROX1 15
15 7.5 ±1.5
ROX2 20
20 7.5 ±2.0
H2 h max
3.5 ±1 2.0
3.5 ±1 2.0
3.5 ±1 3.0
"S" Range Leaded
Style D max
ROX05S 2.5
ROX1SS 2.5
ROX1S 3.5
ROX2S 5
ROX3S 5.5
ROX5S 8
L Max
7.5
7.5
10
12
16
25
l+/-3
28
28
28
25
28
38
d+/-0.05
0.54
0.54
0.54
0.7
0.7
0.75
"S" Range Pre-formed
Style P1 ±0.5 P2 ±2 H1
ROXO5S 10
10 7.5 ±1.5
ROX1SS 10
10 7.5 ±1.5
ROX1S 12.5 12.5 7.5 ±0.5
ROX2S 15
15 7.5 ±1.5
ROX3S 20
20 7.5 ±2.0
ROX5S 30
30 7.5 ±2.0
H2 h max
3.5 ±1 2.0
3.5 ±1 2.0
3.5 ±1 2.0
3.5 ±1 2.9
3.5 ±1 3.0
3.5 ±1 3.0
Literature No. 1773271
Issued: 06-08
Mounting
The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines.
Marking
The resistors are marked with a four-band colour code in accordance with IEC 62.
Grey base colour for Standard Range, Sea Blue colour for "S" Range.
Dimensions are shown for
reference purposes only.
Dimensions are in
millimetres unless
otherwise specified.
Specifications subject to
change.
tycoelectronics.com
passives.tycoelectronics.com