RJH-4L-B_11 Datasheet, PDF (1/7 Pages) Tyco Electronics – Inductive Filtering Modular RJ Jacks

L Series
Corcom Product Guide
Inductive Filtering Modular RJ Jacks
Catalog: 1654001
Issue Date: 06.2011
UL Recognized
CSA Certified
RJ11
RJ11 with
RJ45 with
Block Filter
Sleeve Filter
RJ45
L Series
• Inductive filtering in standard RJ11, RJ45, or
handset jacks.
• Available with standard ferrite sleeve
inductors or higher performance ferrite
blocks
• Available unshielded or shielded with board
grounded shield or spring fingered panel
ground interface
Available Part Numbers
Inductor Filter
RJH-4L-B
RJ45-6L-S
RJ11-2L-S
RJ11-2L-B
RJ45-6L-B
RJ45-8L-S
RJ11-4L-S
RJ45-8L-B
RJ11-4L-B
RJ11-6L-S
RJ11-6L-B
Inductor Filter and Shield
RJ11-2L2-B
RJ45-6L1-S
RJ11-4L1-S
RJ45-6L1-B
RJ11-4L1-B
RJ11-4L2-S
RJ45-6L2-S
RJ45-6L2-B
RJ11-4L2-B
RJ45-8L1-S
RJ11-6L1-S
RJ11-6L1-B
RJ11-6L2-S
RJ45-8L1-B
RJ45-8L2-S
RJ45-8L2-B
RJ11-6L2-B
Shield 2
Shield 1
Specifications
Contacts:
Material:
Phosphor Bronze
Plating:
50 microinches gold
Barrier underplating:
100 microinches nickel
Resistance:
Initial:
20 m max.
After 500 mating cycles:
30 m max.
Ferrites:
Type:
Sleeves:
Block:
High resistivity, nickel zinc ceramic
Single-aperture cylinders
Multi-aperture rectangular prism
Shield Material:
Tin-plated copper alloy
Housing Material: Glass-filled polyester (UL94V-0)
Dielectric Withstanding Voltage:
Line to Line and Line to Ground:
1000 VAC for
60 seconds
Printed Circuit Board Retention:
Before soldering:
After soldering:
1 lb. minimum
20 lb. minimum
Typical Impedance in Ohms
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
1
25
100
200
Frequency in MHz
Ferrite block
Ferrite sleeve
500
Model dimensions and PC board layout on pages 255-259
6
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
247
For email, phone or live chat, please go to
te.com/help
corcom.com