RGE1100 Datasheet, PDF (1/1 Pages) Tyco Electronics – PolySwitch®PTC Devices Overcurrent Protection Device

Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
Fax: [phone]
PolySwitch®
PTC Devices
Overcurrent Protection Device
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin/Lead Plated Copper
(0.81mm [0.032] nom. diameter)
Marking:
16
G1100
Raychem Logo
and Voltage
Part Identification
Lot Identification
(can be on back)
PRODUCT: RGE1100
DOCUMENT: SCD 23380
PCN: 699567
REV LETTER: P
REV DATE: JUNE 29, 2005
PAGE NO.: 1 OF 1
TABLE I. DIMENSIONS:
A
B
C
MIN MAX MIN MAX MIN MAX
mm: 16.5 17.5 21.1 26.0
4.3
5.8
in*: (0.65) (0.69) (0.83) (1.02) (0.17) (0.23)
*Rounded off approximation
D
MIN MAX
7.6
--
(0.30) --
E
MIN MAX
2.0
3.0
(0.08) (0.12)
F
TYP
1.2
(0.05)
TABLE II. PERFORMANCE RATINGS:
I HOLD
CURRENT
INITIAL
TIME TO TRIP
RATED
RATINGS
RESISTANCE
CURRENT
VALUES
AMPS
AT 25°C
HOLD
11.0
AMPS
AT 25°C
HOLD TRIP
11.0 18.7
OHMS
AT 25°C
MIN MAX
0.0037 0.0060
SECONDS AT
25°C, 55.0 A
MAX
7.0
R_{1 MAX}
1 HR. POST
TRIP
RESISTANCE
STANDARD
TRIP
OHMS
AT 25°C
MAX
0.0089
TRIPPED-
STATE
POWER
DISSIPATION
WATTS
AT 25°C
TYP
3.7
Agency Recognitions:
Reference Documents:
Precedence:
Effectivity:
CAUTION:
UL, CSA, TUV.
PS300
This specification takes precedence over documents referenced herein.
Reference documents shall be the issue in effect on the date of invitation for bid.
Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
© 2005 Tyco Electronics Corporation. All rights reserved.