English
Language : 

QH01-0016 Datasheet, PDF (1/2 Pages) Tyco Electronics – Low Cost GMIC SMT Quad Hybrid
Low Cost GMIC SMT Quad Hybrid — 800 - 905 MHz
QH01-0016
QH01-0016
……………………………………………………………………………………
Low Cost GMIC SMT Quad Hybrid
Features
• Small Size and Low Profile
• Industry Standard SOT-26 SMT Plastic Package
• Typical Insertion Loss 0.7dB
• Typical Amplitude Balance 0.3dB
• 1 Watt Power Handling
SOT-26
Description
M/A-COM’s QH01-0016 is an IC-based monolithic power divider
using M/A-COM’s GMIC technology in a low cost SOT-26
plastic package. This Quad Hybrid is ideally suited for
applications where small size, low insertion loss, superior phase/
amplitude tracking and low cost are required. Typical
applications include base station switching networks and other c
cellular applications where size and PCB real estate are at a
premium. Available in Tape and Reel.
The QH01-0016 is fabricated using a passive-integrated circuit
process. The process features full-chip passivation for increased
performance and reliability.
Absolute Maximum Ratings1
Parameter
Input Power2
Absolute Maximum
1 W CW
Operating Temperature
-40°C to +85°C
Storage Temperature
-65°C to +150°C
1. Exceeding these limits may cause permanent damage.
2. With internal load dissipation of 0.125 W Maximum.
Ordering Information
Part Number
QH01-0016
QH01-0016-TR
QH01-0016-RTR
Package
SOT-26 Lead Plastic Package
Forward Tape and Reel1
Reverse Tape and Reel1
1. If specific reel size is required, consult factory for part number
assignment.
Typical Electrical Specifications1, TA = +25°C
Parameter
Units
Min
Insertion Loss above 3.0dB
dB
—
Isolation
dB
14
VSWR
Input
—
—
RF1, RF2 Outputs
—
—
Amplitude Balance
dB
—
Phase Balance
°
—
1. All specifications apply with a 50-Ohm source and load impedance.
Typ
0.7
17
1.3 : 1
1.35 : 1
0.3
1.5
Max
1.2
—
1.5 : 1
1.5 : 1
0.9
6
S1523A
V2.00
www.macom.com
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.