PD10-0041-S Datasheet, PDF (1/1 Pages) Tyco Electronics – Two-Way In-Phase Power Divider 0.4 - 400 MHz

Two-Way In-Phase Power Divider
0.4 - 400 MHz
PD10-0041-S
Features
FP-2
• Space Qualified version of DS-113
• Designed to meet the Stringent Reliability Standards of
Space Hardware
• 50 Ohms Nominal Impedance
• Three Decade Bandwidth
• Low Loss: -0.25 Typ.
Description
PIN 0.015 DIA ±0.005
(0.38 ±0.13)
8 PLACES
12 3 4
56 78
0.312 MIN TYP
(7.9 MIN)
0.385 ±0.020
(9.8 ±0.5)
M/A-COM’s PD10-0041-S is a Two-Way In-Phase Power
Divider designed to operate between 400 KHz and 400 MHz
Absolute Maximum Ratings¹
Parameter
Max. Input Power
Operating Temperature
Storage Temperature
Absolute Maximum
1 Watt Max.
-30°C to +85°C
-65°C to +125°C
0.080 (2.0)
0.100 (2.5)
0.250 (6.3)
0.051
(12.9 ±0.5))
0.350 (8.9)
0.150 MAX
(3.8 MAX)
0.060 (1.5)
1. Operation of this device above any one of these parameters may
cause permanent damage.
Electrical Specifications, T_A = +25°C
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
.xx = ±0.02 (.x = ±0.5)
WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS
Parameter
Insertion Loss
Frequency
0.4-400 MHz
Units
dB
Min.
-
Max.
0.75
Isolation
0.4-400 MHz
dB
25
-
Amplitude Balance
0.4-400 MHz
dB
-
0.15
Phase Balance
0.4-400 MHz
-
-
1°
VSWR
0.4-400 MHz
-
-
1.5
1. All specifications apply with a 50-Ohm source and load impedance.
Specifications subject to change without notice.
North America: Tel. [phone], Fax [phone]
Asia/Pacific: Tel.[phone], Fax [phone]
Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.
V 2.0
1