PD10-0040-S Datasheet, PDF (1/1 Pages) Tyco Electronics – Two-Way Power Divider 10 - 500 MHz

Two-Way Power Divider
10 - 500 MHz
PD10-0040-S
Features
• Space Qualified version of DS-109
• Designed to meet the Stringent Reliability Standards of
Space Hardware
• 50 Ohms Nominal Impedance
• 35 dB Midband Isolation
• 1.1:1 Midband VSWR
Description
M/A-COM’s PD10-0040-S is a Two-Way Power Divider
designed to operate between 10 and 500 MHz
Absolute Maximum Ratings¹
Parameter
Max. Input Power
Operating Temperature
Storage Temperature
Absolute Maximum
1 Watt Max.
-30°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters may
cause permanent damage.
Electrical Specifications, T_A = +25°C
Parameter
Insertion Loss
Test Conditions
0 Volts
Isolation
Amplitude Balance
Phase Balance
VSWR
1. All specifications apply with a 50-Ohm source and load impedance.
FP-2
PIN 0.015 DIA ±0.005
(0.38 ±0.13)
8 PLACES
12 3 4
56 78
0.312 MIN TYP
(7.9 MIN)
0.385 ±0.020
(9.8 ±0.5)
0.080 (2.0)
0.100 (2.5)
0.250 (6.3)
0.051
(12.9 ±0.5))
0.350 (8.9)
0.150 MAX
(3.8 MAX)
0.060 (1.5)
Dimensions in ( ) are in mm.
Unless Otherwise Noted: .xxx = ±0.010 (.xx = ±0.25)
.xx = ±0.02 (.x = ±0.5)
WEIGHT (APPROX.): 0.09 OUNCES 2.5 GRAMS
Frequency
10-500 MHz
-
10-500 MHz
10-500 MHz
10-500 MHz
Units
dB
dB
dB
-
-
Min.
-
25
-
-
-
Max.
0.6
-
0.15
1°
1.3
Specifications subject to change without notice.
North America: Tel. [phone], Fax [phone]
Asia/Pacific: Tel.[phone], Fax [phone]
Europe: Tel. [phone], Fax[phone]
Visit www.macom.com for additional data sheets and product information.
V 2.0
1